Fifty bucks and a few hours is all it takes to put together this finishing booth. It keeps overspray off my tools and dust off my projects. Since I use waterborne [...]
Universal Clamp Rack I’ve tried several designs for clamp racks but this one’s the best because it holds lots of different types of clamps. It’s also very simple to build. I [...]
Light-Duty Folding Worktable By Kevin Boudreau Sometimes a guy just needs some space on which to spread out. That’s why I built this folding worktable for my compact workshop. [...]
I came up with this slick way to drill a large, straight hole in the end of a post. It works great and makes good use of my tall floor-mounted drill press. To [...]
I recently built a project that required a tall vertical fence for my tablesaw. My tablesaw fence lacks a T-slot and I didn’t want to drill holes through [...]
Furniture Repair Tips Tricks for taking it apart and getting it back together. by Mac Wentz Major furniture repair often involves disassembling the piece and putting it back together. Sounds [...]
I found a new place to store dispensers right under my nose. Any lightweight stuff that comes in a box can be fastened to the bottom of a cupboard and still leave [...]
To change the blade on my tablesaw, I used to wedge the front end of my push stick between the saw table and the blade teeth, so I could loosen or re-tighten the arbor [...]
There was no room in my basement shop to cut full sheets of plywood. I always had to have the home center guy cut it down to size with his panel saw. [...]
My burgeoning collection of spring clamps and small bar clamps was crying out for a storage solution. The doors on my shop cabinet offered just the place [...]
