Archives

Contributing Editor Glen D. Huey made this short video while working on the cover project for the upcoming November 2011 issue of Popular Woodworking Magazine (which should start arriving in...

This weekend I built a contemporary lamp for the August 2011 issue of the magazine that was all-electrons, all the time. It has been a while since I have worked...

Like many of you I have a standard size two cargarage that my wife also likes to use to park her car in.  I had a Rigid table saw but...

If you follow my woodworking habits, you are well aware that I enjoy using my routers with pattern bits chucked in the collet. The piece I’m working on for the...

  Welded Router OK, I admit it. I’m not the best at tool maintenance. The cord on my trusty old router was frayed down to the wires about 8" away...

  Soup Up Your Router Table A Host of Great Accessories By Dave Munkittrick Even if you already own a router table, you’ll want to build these accessories to increase...

    I shorten the time it takes to rout dadoes with a simple jig made from acrylic.A small, 6-in.x 24-in.piece will do.Mark the point where your router base will ride against the...

Next-Generation Router Table Make more accurate cuts with a flat, solid-surface top. By John English 9 Key Features 1. Hinged Top. Bit changes are much easier. 2. Pivot Control. Just...

Rigid Routing Sled A routing sled is a great help when coping the ends of rails and stiles. But I had a problem when I built my first sled. The...

            Recently I was routing a decorative edge on a large round tabletop. About halfway around, my router started to vibrate and I noticed (with...

          This simple guide guarantees success whenever you need to make a straight routing pass. It’s perfect for jointing a long edge or routing dadoes and...

  Multiple bases make this compact router extremely versatile.   by Randy Johnson           Laminate trim routers are amazing little machines. Their [...]