When my scrollsaw blade gets dull, it’s really only dull on the bottom half, because the wood I cut is usually less than 1/2 in. thick. To get more [...]
Grizzly has added some muscle to one of their best-selling 14-in. bandsaws and come up with the new model G0555X machine, $595. I like the large motor (1-1/2-hp, 15-amp), I like the [...]
Q. I’ve been told that the gray wheels that came with my grinder will burn my woodworking tools and that white wheels are better. True? A. The stock wheels that come with most grinders are [...]
Model 22124, $950 • 1-3/4-hp 120/240-volt motor. 30-in. rip capacity to the right of the blade. • Cast-iron side tables and folding outfeed table. • 4-in. miter gauge fence [...]
Q. Is it possible to get a custom-made router bit to match an old molding profile? A. Yes, it is! Andrews Toolworks is one company in the business of making one-of-a-kind carbide bits. [...]
Should I spend more money on cast-iron wings? Q. I can save money by buying stamped steel rather than cast-iron extension wings for my new tablesaw. What do cast-iron wings offer that steel wings [...]
jointer is a must-have for many woodworkers. Few can do without the smooth, straight edges and faces they get from their jointers. We tested twelve 6-in. floor models that sell for under $600. A [...]
For $250 and half an hour’s worth of simple improvements, you can cut precise mortises all day. Mortising machines first answered the prayers of mortise-cutting woodworkers over 120 years [...]
If you've got a Bosch router hanging in your router table and are tired of reaching under the table to make height adjustments, here's good news. The new RA1165 base, $60, includes [...]
Fine-tuning dado width for a perfect fit can drive you nuts because plywood thickness is inconsistent. Enter the Dado Wiz, $159. That's a lot of dough for a dado-only jig, but this [...]
Frame-and-panel router bits sets are thickness specific, so the bits you use for a cabinet door may not be the same set you need for a delicate jewelry box made from thinner [...]
The Akeda dovetail jig first hit the woodworking world in March 2003. Production problems took this tool off the market for a while, but now it's back and available from more distributors [...]
