I came up with this slick way to drill a large, straight hole in the end of a post. It works great and makes good use of my tall floor-mounted drill press. To [...]
Adding a dust collection system to my shop was a great move, but it wasn’t cheap. I did manage to save money by making my own blast gates. The main component of [...]
These clamping jigs are easy to make and you’ll use them constantly. I’ve found that 4-inch and 6-inch jigs fill most of my needs. Each jig consists of two L-shaped 3/4-inch MDF [...]
Gauge blocks work great for quick, accurate biscuit joiner fence settings. All you do is pinch the block between the fence blades. This technique will also ensure the fence is set parallel to the [...]
It's easy to cut perfectly round tabletops of almost any size on your tablesaw. All it takes is a simple jig (Fig A) and careful setup. With this method, you can safely cut dia-meters from 12 [...]
Making Lipped Drawers With A Dovetail Jig By Tom Caspar You can do more with your half-blind dovetail jig than meets the eye. You’ve probably used it to make drawers with plain, inset fronts, but [...]
5 Router Jigs Improve your accuracy and control. By Bill Hylton Why buy a commercial jig when making one yourself will triple your enjoyment? First, you’ll experience the joy of building a [...]
This guide takes only a minute to make and helps you make perfect corners in four different diameters. Simply use a different sized coin (penny, nickel, dime, quarter) to create the four radii. [...]
Getting rounded corners that match is a cinch with this template. Legs fastened to both sides automatically center the template on the workpiece. Once the template is [...]
Tenoning Jigs By Tom Caspar Tenoning jigs make the complicated world of mortise-and-tenon joinery a lot simpler. I’ve used a homemade wooden jig for years. I stand a rail upright on the tablesaw [...]
My shop space is so limited-only 12 feet square-that I designed this system to house four machines: belt-disc sander, miter saw station, drill press and planer. Each machine has an accessory [...]
With this simple jig, a drill press and a cup grinder, I can sharpen any jointer or planer knife. First I make a hardwood block and cut it to 1/16 in. less than the length of the knives. Then I [...]
