Archives

      Changing the sanding sleeves on a spindle sander can be as tough as removing an old rusty bolt. Next time, try this trick: Put the drum in...

Rigid Routing Sled A routing sled is a great help when coping the ends of rails and stiles. But I had a problem when I built my first sled. The...

Anti-Slip Dust-Collection Table Here’s a pair of sanding helpers that work great together. The rug pad provides a soft anti-slip surface. The Peg-Board, combined with the holes in the rug...

          It seems like I’m always misplacing my push sticks, blade wrench, featherboards and other small tablesaw accessories. To solve my problem I added a shallow...

        Here’s my solution for storing skinny things like wood trim and edge banding. I bought a 12-in.-dia. by 8-ft.-long cardboard concrete form at a home center...

        Fifty bucks and a few hours is all it takes to put together this finishing booth. It keeps overspray off my tools and dust off my...

Staining Pine Make this inexpensive wood look like a million bucks. By Tim Johnson Purchase the complete version of this woodworking technique story from AWBookstore.com. 1. Brush on two generous...

  One last molding to mill. I install this ogee bit in the router table and I align the fence barely in front of the bearing. Used in the router...

Basic HVLP Spray Techniques How to succeed at spraying a waterborne finish. By Jon Stumbras   When it comes to finishing, we’re all looking for easy answers that give professional...

    I recently needed a jig to trace lathe turnings. I tried a variety of designs but none produced the accuracy or ease of operation that I wanted.   ...

OLD FORK– SAUCER AND CANDLE. !! UNIQUE AND EASY. COST PENNIES TO BUY MATERIALS MINUS A FORK MISSING FROM YOUR KITCHEN DRAWER??

THIS SHED IS MADE FROM PALLETS  ALL DENAILED AND MACHINED WITH   TGV. THIS WAS MADE OUT OF 12 X 6 X 4 PALLETS.ALL HAS BEEN GLUED AND SCREWED .THEN I SPRAYED WITH...