Archives

5 Router Jigs Improve your accuracy and control. By Bill Hylton Why buy a commercial jig when making one yourself will triple your enjoyment? First, you’ll experience the joy of...

This guide takes only a minute to make and helps you make perfect corners in four different diameters. Simply use a different sized coin (penny, nickel, dime, quarter) to create...

        Getting rounded corners that match is a cinch with this template. Legs fastened to both sides automatically center the template on the workpiece. Once the template...

I decided to organize my router bits by making a tray from a scrap block of wood. But I soon discovered that my 1/2-in. shank bits wouldn't fit into 1/2-in.-dia....

Flammables Cabinet Keep your shop and family safe! Have you got finishing supplies scattered all over your shop? Concerned that they’re a fire hazard? Organize them into this cabinet built...

My workbench is beautiful and I want to keep it that way, so I cover the top with builder's paper ($7/140-ft. roll at my local home center) whenever I'm gluing...

Tenoning Jigs By Tom Caspar Tenoning jigs make the complicated world of mortise-and-tenon joinery a lot simpler. I’ve used a homemade wooden jig for years. I stand a rail upright...

I added this hold-down to my tablesaw's sliding cutoff jig and find it a great convenience, because the height of the clamp is easily changed. This clamp uses a standard...

Sharp edges and thin laminates have a way of slipping under the tablesaw fence and ruining a project—or worse. My answer is to lay a piece of 1/4-in. hardboard or...

  This handy stop grips tightly and is easy to adjust, so you can lock in crosscuts. A spacer the same thickness as the saw's auxiliary fence is the key....

I love having a cutting list close at hand. But hanging on to it when both hands are busy was a problem – until I bought 24 clothespins for $2...

Trying to rip sheet stock single-handedly while standing 8 ft. behind the saw is no picnic. A pair of horses the same height as your saw table carry the load...