Last Call

SLS150Mg-P-ToolOnly-1-1As the time draws near, a couple of spots have opened for the Senco event here at Popular Woodworking Magazine. They are bringing in their newest pinner, the 21LXP (which won’t even be available to dealers at the time of the event) for you to try, along with lots of other new products. Senco and PWM are giving away door prizes and everyone will get some swag. I forgot to mention, there’s food and refreshments. The whole thing takes place this Wednesday evening from 6:30 pm until 9:00 pm at the PWM shop (8469 Blue Ash Rd., Suite 100, Cincinnati, OH…look for the Senco vehicles). So, if you are able to fill one of the freshly opened spots, let me know immediately by emailing me at chuck.bender@fwmedia.com

—Chuck Bender

 

2 thoughts on “Last Call

  1. skirincich

    Hi Chuck,
    Is there a chance that the SketchUp file for the Esherick Inspired Stool can be checked and possibly revised? There appears to be some asymmetry with regard to the leg holes in the seat and the resulting angles. Thanks.

    Steve

    1. Chuck BenderChuck Bender Post author

      Hi Steve,

      The holes in the seat are actually asymmetrical, which is pretty typical of Esherick’s stools (and done purposely for the stool in the article). If you drill the holes using the method I described in the article text everything should work out fine. Email me if you have additional questions or concerns. chuck.bender@fwmedia.com

      Thanks,

      Chuck

COMMENT