In Featured Article

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

By Glen D. Huey
Page: 28

From the August 2007 issue #163
Buy this issue now

I’ve never been able to wear sound protection and safety glasses at the same time in the woodshop. The problem is, if you’re wearing glasses and then add earmuffs, you get pinched at your temples from the pressure on the arm of the glasses. And, the hearing protection isn’t effective because the arm of the glasses breaks the seal between the earmuffs and your ear.

FullPro Protective Gear has combined the two most critical pieces of personal protection in the shop into one product – SoundVision Eye Protection. We tested the Eye Protection Kit with Earmuffs that’s complete with Peltor H9 earmuffs, two pairs of self-adhesive hook-and-loop patches and SoundVision lenses with flexible hook-and-loop straps.

I know; I hear you. “That’s crazy.” I thought so too, until we had them in the shop.

From the August 2007 issue #163
Buy this issue now


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts

Start typing and press Enter to search