Chris Schwarz's Blog

St. Peter’s Cross and the Ultimate Leg Vise

If a leg vise has a disadvantage – and I’m not quite willing to admit that it does – it would be its parallel guide.

The parallel guide is a strip of wood at the bottom of the leg vise that prevents the vise’s chop from spinning like a propeller. It also creates the vise’s leverage and makes it pinch your work right at the top of the chop. However, to do its job the parallel guide requires that you move its pin when you want to hold really thin stock or really thick.

And moving that pin is something that would-be bench builders don’t like. They always say something like: I want a leg vise, but I don’t want to stoop all day moving that pin.

If you are one of those anti-stooping skeptics, then you should take a close look at the photos, drawings and video in this blog post. The St. Peter’s Cross (sometimes called “Croix de St. Pierre”), eliminates the parallel guide and the pin and the stooping. I first wrote about this bench accessory in my 2007 book “Workbenches: From Design and Theory to Construction and Use” and showed a drawing of one from the old book “The Amateur Carpenter and Builder” (Ward, Lock & Co.).

Lots of readers have asked about the cross in the last five years. Some asked: How does it work? Does it really work? It doesn’t really work, does it? Why would you discuss something that doesn’t work? But most readers asked: Where can I get one?

Here are the answers: It works like scissors. Yes. No, it works. Because it works. Benchcrafted.

Yup, soon the bench geniuses at Benchcrafted will be offering a cast St. Peter’s Cross that you can install on your workbench and eliminate the parallel guide and pin and stooping. Jameel Abraham and his brother, Father John, brought an oversized prototype of the hardware to the Lie-Nielsen Hand Tool Event in Chicago to show off. They had it paired with their Glide leg vise hardware, and the action was nothing short of magnificent.

Jameel says they are working with a patternmaker now to make the patterns for  castings and they hope to begin offering it by the end of the year. No firm word on pricing. But it will be easy to install on any leg vise, either new or as a retrofit.

I ordered one so I can install it on the Roubo bench I built in 2005.

There are a lot of interesting details to discuss about this hardware. How is it best attached? Where did its name come from? Is it a French innovation? Can you make one from wood or lawnmower blades? But I have to get to the second day of the show right now.

So stay tuned this week for more entries on St. Peter’s Cross.

— Christopher Schwarz

45 thoughts on “St. Peter’s Cross and the Ultimate Leg Vise

  1. abt

    Great LN show in Chicago. That bench leg vise w/cross looks like a great addition.

    Thanks Chris, Megan, and the vendors for all the great discussions and demos. And of course, Jeff Miller for hosting. It was well worth the trip.

    1. Megan FitzpatrickMegan Fitzpatrick

      On behalf of PW, you’re welcome! I thought the LN show at Jeff’s was great fun – and greatly crowded (which makes it seem all the more exciting!)

  2. hmann

    I can see how the scissor action of the cross and how its attached eliminates the pin in the traditional leg vise, however when you do this, don’t you lose all the extra clamping force generated by the pivot point of the pin being so low (one of the strengths of the leg vise)? With a vise like this it would seem the screw alone is doing all of the clamping, and what your left with is a face vise disguised as a leg vise?

  3. andrewr

    Dumb question #612 …
    How does this mechanism assist when using the leg-vise to hold very large objects like a door? The cross would get in the way… or would one only need the two inches or so of clamping surface that is present on each side of the cross?

  4. Andrew_K99

    Very cool!

    I sent you a link to that picture last year when I first saw it and suggested the guys at benchcrafted might be interested in it. You’ve got me wondering if you passed it along.


    1. Christopher SchwarzChristopher Schwarz Post author

      That picture was in my book from 2007. It has been scanned a lot and disseminated on the Internet.

      1. Andrew_K99

        I figured they had long since seen the pictures (and I knew you had), it just made me smile when I saw you mention that they were making them.

  5. SteveL

    Wow, the Hovarter vise looks like a beautiful piece of work — it’s amazing the level of craftsmanship going on to support hand woodwork today.

    1. RONWEN

      I’ve had a few discussions with Len, he is a mechanical engineer by profession and has worked on developing his vises as a pet project over a number of years. He now has a very soundly engineered mechanism that he offers in several styles of vises for work benches.
      “Old isn’t always better than new designs”.

    2. ccarse

      I like the Hovarter concept but after using one at WIA11 I went with the Benchcrafted vise. The Hovarter feels like you’re going to break it when you crank down on it. It just doesn’t feel like it’s going to last a couple hundred years like the Benchcrafted vise does.


    Len Hovarter’s leg vise seems to be a cleaner and simpler solution for a leg vise — no spinning in & out for adjustment and plenty of clamping force.

  7. Maurice

    Perhaps it’s just me, but the configuration shown does not look like it offers much jaw height above the screw. Not sure if that is a design limitation, or can be user defined. And yes, I’m sure this will be a very premium product, like north of $500.

  8. BLZeebub

    Schweeeeet! Years ago I bought an old wooden vise screw at auction. Big deal? Well, the real reason I latched onto the shabby old dog was because it still had the leg vise attached ALONG WITH a wooden version of the St. Peter’s cross. So if anyone out there lusts for such a thing and might bemoan the expense of a cast piece, take heart, it can be made out of wood and work like a charm. I have proof.

    I also just nailed down a nice little antique vise with a cast version of the cross too. Gotta love eBay.

  9. SteveL

    Zackdog’s comment struck a chord with me — what about just mounting the Veritas or LN twin screw vise hardware vertically as a leg vise? Seems that might solve the parallel guide challenge.

    1. St.J

      If you use a twin screw vise with both screws closing the vise and then put a board at the extreme end it’s likely to make the vise jaws wedge slightly, or rack. This wonwell hold well.
      If the screw at the opposite end from the board opens as the top one closes then the wedging effect will go the other way and hold the board with parallel jaws.
      Len Hovarter’s description of this in his video is better than my explanation.

      I come across as a sales rep for Hovarter. I have no connection to him and haven’t even managed to get hold of one yet.

  10. zackdog

    Just curious Chris, why didn’t you discuss Lie-Nielsen’s new version of their leg vise last summer when they started using a chain-driven, double screw arrangement?

    I happened to get their first one and it works great.

    For some reason, L-N doesn’t really advertise it in their Roubo description, but it’s visible in their leg vise close-up photo. They also don’t list it with their other workbench hardware, but I’d bet that it’s available for purchase.

  11. Bill Lattanzio

    I believe it’s called a St Peter’s Cross because the Roman’s executed St Peter by nailing him to a cross shaped like an X. Possible upside down if memory serves.

  12. Christopher Hawkins

    I just came in for dinner after drilling the hole in the leg for the Benchcrafted glide vise. My plan was go back out and make the mortise in the leg for the parallel glide. After reading Chris’ post, I’ve decide to make a St. Peter’s Cross and install it instead. I believe the Benchcrafted one will be wonderful, but I’m confident I can make one cheaply install it without issue.

  13. damien

    My guess is that the writers (Ward, Lock & Co.) confused croix de Saint-Pierre with croix de Saint-André, still very present in Google image. Surprisingly as the cross of St Andrew is also part of the Scotish flag and the Union Jack.

    1. Bill Lattanzio

      That is also held in tradtion that St. Andrew was nailed to an X shaped cross; he being St Peter’s brother. Though in Catholic school we were taught that St Peter was also crucified on an X shaped cross. But it’s been 20 years so I could be wrong.

  14. Dean

    By “…oversized prototype…”, are you referring to the height of the prototype above the bench top only, or additionally the size of the hardware itself?

  15. Dean

    It would be nice if Benchcrafted could also offer a retrofit kit, comprised of the “cross” or “scissors” pieces and some instructions, for those who already have the Benchcrafted Roubo leg vise hardware installed with the parallel guide. From what I’ve seen, most of the vise chops and bench legs, look thick enough to accommodate a long mortise for installation.

  16. glabbe

    Wow, very impressive! Judging by the current price of the Glide, I imagine this setup will be out of my price range for some time.

    Watching the video did get me wondering about vertically mounting a twin screw vise to obtain a similar effect. To your knowledge, has anyone tried installing one in this manner?

    Thanks for posting the video,

    1. St.J

      This has been done. There may be a problem with racking because essentially you’re using one end of the twin screw.
      Len Hovarter overcame this by having the bottom screw turn the opposite way to the top one so that creates a slight wedge:
      Because it’s a quick release piece of magic you open the vise [sic] by simply pulling it, push it closed, make a small turn on the handle and the top end closes and the bottom opens slightly.

  17. Ixzed13

    Wonderful!!! I might be missing something but why not use the proper size and thickness angle iron stock (with the correct additional parts top and bottom) instead of a casting?

Comments are closed.