Saws

ATC13_lunn_saw_IMG_7555

Seven Questions with Andrew Lunn

With Andrew Lunn’s announcement that he’s leaving the sawmaking business, the No. 1 question on all our minds is: Who will have the guts to pull a prank on Jameel Abraham from Benchcrafted at the next woodworking show? Besides being an excellent sawmaker, Lunn is also a fan of the occasional practical joke. Ask...

Andrew Lunn Exits the Sawmaking Business

Andrew Lunn, who made the finest backsaws I’ve ever used, has decided to stop making saws, though he is not hanging up his shop apron entirely. Lunn made the announcement to his customers today and has offered to transfer all open orders to Ed Paik, an excellent custom sawmaker at Medallion Toolworks. That’s the...

Video: Sawing a Book – Safely

Say you want to scan one of your books so you can have it on your iPad or other tablet device. The easiest way to scan the book is to remove the binding and run it through a sheet feeder. This, of course, destroys the book. But it does make for nice scans. Recently...

hoff_sawbench_IMG_5133-1

Video: Level the Feet of a Chair or Sawbench

Getting the four feet of a sawbench, chair or stool all in the same plane is a challenge for some woodworkers. You can end up nibbling a bar stool into an ottoman if you take the wrong approach. I’m sure there is some way to do this with the power of math, triangles and...

sawhandles_IMG_5097

Ron Herman’s DVD on Saw Sharpening

One of my goals in this job has been to help produce a saw sharpening video that makes sense of all the dogma about this simple task. Should you set the teeth before or after you file them? Should you sharpen fleam from one side of the saw? Or turn the saw around to...

Barnes Treadle Saw in Action – Again!

Today as we finished up my three-day class on “Handplane Essentials” at The Woodwright’s School, we spent some time at Roy Underhill’s Barnes 1874 combination machine – a treadle-powered table saw that kicked my keister during my first visit to the school. This time, I did a little better job ripping lumber on the...

Watch Me on 'The Woodwright’s Shop.’ I Can’t

UNC-TV has posted the shows from the new season of Roy Underhill’s “The Woodwright’s Shop” so you can watch them on your computer – including the two episodes I appeared in. We taped the two episodes right before I taught a sawing class at The Woodwright’s School in Pittsboro, N.C. You can read about...

Knew Concepts Fretsaws Approach Perfection

I’m just about the last hand-tool blogger/forum gadfly to write about the Knew Concepts fretsaws, which have recently made the evolutionary leap from the world of jewelers to that of woodworkers. I’ve purchased two of the Knew Concepts saws during the last year and watched as its maker, Lee Marshall, has refined the tool...