Get Woodworking & ‘I Can Do That’
OK – so I’m two days late on posting about Get Woodworking Week 2015, Feb 15-21. And that feels about right, because it always takes me a day or three longer than planned to get away from [...]
Making a Jack Plane
While I wait for the homemade stopping to set on my boarded chest project, I’ve allowed myself an attempt at making a plane. A pair of wooden planes caught my eye on eBay and I took a punt [...]
Wonky ‘Corner Table’ Build (& Thank You SketchUp)
Believe me – I’m at least 10 times as tired of my kitchen rehab as you probably are. But there’s one last big project to tackle before I can call it (almost) done. That’s a [...]
Galbert Drawsharp in Use
Before you read beyond the first few sentences of this blog entry, there a couple things you should know: I have no problems sharpening a drawknife. Never have (except that time in the 1990s [...]
Woodturning with Tim—Christmas In February
I’ll admit right here, I haven’t done a lot of turning in my many years of woodworking. Not that it wasn’t appealing, but it wasn’t what was required at the time. [...]
Q & A: Taking Dimensions From Photos
Q: Sometimes a catalog has a piece of furniture that I’d love to build myself. How can I get the dimensions for a piece of furniture off a photograph? A: Try this method for scaling from photos: [...]
Router Table Box Joints
Router Table Box Joints Making box joints on a router table is a time-saving alternative to making them on the tablesaw. You don’t have to fuss with a dado set, for one. More importantly, using a [...]
Architecture as Furniture Inspiration
When considering ideas and looking for inspiration, I don’t like to limit myself to just the furniture or joinery in isolation. Considering the environment around me helps me form ideas and [...]
Furniture Design: Think About the Tools You Have
In our live webinar on February 18, artist and furniture designer Yoav Liberman will talk about getting design inspiration from raw materials. Here’s something that frequently inspires my [...]
The Modern High-traction Doe’s Foot
The notched batten – also called a “doe’s foot” – is a great way to restrain your work on the bench without a tail vise. With a holdfast and a doe’s foot, you can even work across the grain [...]
Grandpa’s Shop-made Gunstock Scraper
I was in Florida for a few days last week visiting my brother, niece, mom and stepfather. I stayed with my brother, Ian, who, like me (and other family members), inherited some woodworking tools [...]
Q & A: Knocking Apart Loose Joints
Q: I tried reversing a clamp to pull out the rungs of an old chair that needed regluing, but I couldn’t get all of the rungs out. What do I do? A: Spreader clamps can be helpful, but the most …
