This article is an excerpt from Lois Keener Ventura’s new book Sculpted Band Saw Boxes: Design, Inspiration, and Construction.Woodworkers love to make them and nearly everyone wants to have one—we’re talking about beautifully sculpted band saw boxes—and none are as outstandingly unique as those made by author/woodworker Lois Keener Ventura. This book follows in the steps of Lois’s first bestseller, Building Beautiful Boxes With Your Band Saw, and inside it are step-by-step instructions for eight all-new designs, plus designs for an additional ten projects. Birthday, holiday, and special event gift giving has never been so easy. Create a one-of-a-kind heirloom today!
Graceful undulations propel these docile creatures along ocean currents. North of Grand Cayman Island within the confines of a protective barrier reef, stingrays are habituated to humans and will interact peacefully, accepting fishy treats from divers. This box embodies a school of rays flying in serene slow motion through calm currents. LKV
Notch and Cut
This box has some open ends. In order to start the second cut in the right cutting plane, I cut a notch for the saw blade.
Make the Cut
Slide the saw blade in the notch sideways and away you go. This same proceedure will need to be done on the other side of this box.
Meet the Cut
When you get to a cutting junction, stop, shut off the saw and back out.
Lightly sand (unless you want sloppy-fitting drawers) the inside of the drawer cutouts. I won’t go into the ramifications of sloppy-fitting drawers.
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.