In Shop Blog, Woodworking Blogs

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

Screen Shot 2013-01-31 at 3.34.00 PMPeter Ross’s blacksmith and whitesmith work is unparalleled. I’d wax prolific here, but instead, I’ll just share with you the entire story I wrote about him for our November 2012 issue, “Controlled Irregularity.”

And, we’ve just released a DVD from Peter – the first in our new Blacksmithing for Woodworkers series – “Forging a Compass.” Peter walks you through the steps – both at the forge and at the bench – for making an 18th-century-style square-head compass (what we (erroneously, according to two Peters – Ross and Follansbee) call “dividers”). All you need is a coal forge, an anvil and a handful of files (you’ve been looking for an excuse to build a small forge in your backyard – right?). And even if a forge isn’t in your future, it’s fascinating to watch the process of turning an iron blank into a beautiful tool. Get your copy of “Forging a Compass” now at ShopWoodworking.

— Megan Fitzpatrick

 


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts
Showing 14 comments
  • Leon Renaud

    I’m a blacksmith ironically because about 30 years ago the first pay Tv channel we got out here featured Roy Underhill’s TV show the Woodwright Shop! Roy did a piece on blacksmithing as part of the show and off I went! It is very easy to start blacksmithing take just a minute and do an internet search on the subject. One of the best sites is Iforge you need a control able air source, A container for your fire, Coal or Charcoal , a hammer of about 2pounds. and a flat chunk of iron for an anvil. Scrounge a bit and you should be able to start hammering iron for 50$ or less! You can find most of this stuff on the side of the road on trash day! You don’t need any fancy equipment just to start out!

  • TomHolloway

    Maybe I missed it, but the parenthetical note on terminology caught my eye: What do the Peters say about “dividers” vs. “compass”? Is it in this book, or available somewhere online?

  • McDara

    You can begin by making a forge out of an old hair dryer, some sheet metal from your local home center and a hand full of bricks. Also for an anvil a 6 to 12 inch section of railroad tie works perfect. I am rather a novice at blacksmithing but I’ll consult my professional friend and post more details.

  • switzforge

    How long is it? (in minutes not inches)

  • switzforge

    OK I ordered my copy. I hope there are lots of others in the series.

  • WiseGuy81

    I love that this came out just as I was thinking of contacting him to simply buy one from him (A la Chris Schwarts’ blog)…the only problem is that I do not have a forge. I would love to buy this disk but can you tell me if there will be content in this or following releases on the construction of a forge (gas vs. coal options?).

    I think it would be really fun to make items from old files or lawn mower blades…or any scrap or new stock. I just need to know how to get started.

  • griffithpark

    I hope this is the first of many in this series.

    Here in Los Angeles there are many blacksmiths, but the movie industry keeps them busy on prop work.
    So I’m just going to have to make my own stuff.

    RWW – there are always gas forges, which the HOA will never discover. The ‘hammer on anvil’ sound is an entirely different animal, however.

  • renaissanceww

    Hmm, I wonder how my homeowners association would feel about a coal forge in my backyard.

0

Start typing and press Enter to search