In Shop Blog, Woodworking Blogs

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

Record No 6 Shooting

While putting a new tool through its paces for a future review, I was reminded just how important the basics are and what a fine job a regular bench plane will do when sharp. I was delighted with the new tool I was using but I was equally delighted with my normal “go to” planes. I’m very pleased to see the options we have now regarding specialist planes for shooting and innovative sharpening media, but even those tricks that we find up our woodworking sleeves can’t help unless the simple matter of a sharp edge and time at the bench are not applied.

The plane above is a totally standard Record No 6. It was a rather tatty affair and needed a bit of cosmetic TLC to make it comfortable in the hand. The iron is the standard version the plane was fitted with and it was sharpened on an 8″ x 2″ India combination stone with a strop to finish. The surface left on the end of the Utilie was flawless.

Wooden Jack Shooting


I also used my wooden jack that is set up in the same way. No surprises – the results are also top drawer. Don’t, however, think this is a post about “vintage is better” or anything of that nature (I’m not sure there’s enough room on the head of that pin for much dancing). The point really is, it does not matter much about the sharpening media, the type of iron in your plane or the incline on your shooting board; the key ingredient it the ability to get sharp for your needs and control over your tools.

If you want or have a need for that new thing, whatever it may be go for it. Enjoy the quality, enjoy the experimenting and even the added benefit it may bring. But what my time with the new tool reminded me was that if you’re new to woodworking, buy one good-quality regular bench plane, new or vintage (new will be easier if you are a total novice), get a sharp edge and spend time in the shop – it’s amazing what falls into place from there.

— Graham Haydon

Editor’s note: If you’re in need of an excellent book on sharpening (that dispels myths and explains everything you ever wanted to know about sharpening in a no-nonsense manner), I recommend Ron Hock’s  “The Perfect Edge.

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recent Posts
Showing 10 comments
  • Bill Lattanzio

    I have to ask you: Are you a hollow grind sharpener or not so much? I’m a firm believer in a “flat angle” sharpening system, however, I am subtly beginning to lead towards hollow grinding some of my planes; some being the key word.

  • Bear

    Ron Hock’s book is excellent. His discussion about steels, heat treating, etc was better than the texts I had in engineering school; practical, down-to-earth, but with enough technical content to move it from my woodworking library to my engineering library. With that technical set-up, the sharpening piece became very clear and easy to understand and distinguish the advertising hype from the real value to the woodworker.

  • robert

    Do you have a copy of Chris Schwarz “Handplane Essentials?” It was published by your new employer, and is going out of print. You might want to pick it up if not. It is an exhaustive treatment of all that is handplanes. If you can add something beyond this coverage, feel free, otherwise…


Start typing and press Enter to search