This weekend I built a contemporary lamp for the August 2011 issue of the magazine that was all-electrons, all the time.
It has been a while since I have worked this way – usually my mode is to use machines for the heavy lifting and hand tools for the details. And I was surprised by how I approached the power tools differently after a long walk on the so-called “dark side” (meaning no electricity).
1. Don’t Jig It. Do It.
For this lamp I had to make several small discs of plywood of different diameters. My first inclination was to build a circle-cutting jig that I could use on the band saw and the disc sander.
But after laying out the circles, I decided to try making a couple just freehand. I cut them right against the line on the band saw – no jig – then cleaned off the sawblade marks on the disc sander. Again, no jig.
If they aren’t perfectly circular, I sure as heck can’t tell.
2. Geometry is Your Friend.
For the base of the lamp, I had to array three holes around a circular surface angled at 22.5°. Instead of using arithmetic (or SketchUp) to pinpoint my holes, I merely struck an equilateral triangle on the face of the disc and erected perpendiculars off each vertex on the 22.5° edge. Then I used dividers to find the midpoint. No numbers.
Best of all, it was almost impossible to make an error in locating the holes this way.
3. Routers Love Traditional Workholding.
There was a lot of pattern routing and routing of tiny parts for this lamp. My wagon vise and an improvised planing board secured in my wagon vise made short work of things. No router mats.
In the end, my hand-tool approaches made the power-tool operations even faster and easier for me. And I wasn’t having to rely on trial-and-error to set up jigs, which is a task I dislike.
Don’t get me wrong: I’m not about to take the fence off my table saw. And I’m not trading in my smoothing plane for a random-orbit sander. But it is nice that my traditional skills are helping my modern ones.
— Christopher Schwarz
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.