For the June 2018 issue of Popular Woodworking Magazine, I’ve built a folding and adjustable bookstand that is assembled with copper rivets and folds up to a neat package about the size of smartphone.
It’s a quick and fun project that uses shop scraps and regular shop equipment. The result is great for reading, cookbooks or even holding your iPad while watching movies. It can be scaled up or down in size to suit.
The only tricky part of making the bookstand is getting familiar with installing the copper rivets. These No. 12 copper rivets are typically used for leatherwork, but they show up in some mechanical furniture pieces as well.
You don’t need fancy equipment to install the rivets. The holes and counterbores are made with a counterbore bit made by Timberline that is intended for pan-head screws. Once you get the shaft of the rivet in place, you press the “burr” (it looks like a washer) onto the shaft of the rivet.
While you would normally use a metal rivet-setter for this job, I made a wooden one with a dowel (it took 2.1 minutes) that works just as well. Then you snip off the excess copper with nail snips and peen the shaft with a hammer.
(If you want a lesson in riveting, check out my video on building a Campaign Chair in Shopwoodworking.com.)
I’ll post a video of the process as we get closer to the publication date of the article.
— Christopher Schwarz
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.