Flexner on Finishing Blog


Bob Flexner is a contributing editor to Popular Woodworking and the author of woodworking finishing books, including “Flexner on Finishing,” “Understanding Wood Finishing,” and “Wood Finishing 101,” available at ShopWoodworking.com. Also available are his DVDs on “Repairing Furniture” and “Refinishing Furniture.” Bob is probably best known for defining the products used in wood finishing and organizing them into categories that make them easily understandable.

He’ll also be writing here about furniture restoration – another of his areas of expertise.
Follow on RSS here. Flexner on Finishing Blog RSS Feed

Oil & Varnish: A Refresher

If you go back to the early issues of U.S. woodworking magazines in the 1970s and ’80s and read about oil finishes, you’ll come away confused. The more you read the more confused you’ll become. I know this because I was there. The claims and explanations were all over the map....

Brands of Dye Stain Differ

For my column in the current issue of Popular Woodworking Magazine, April, 2017 (#231), I wrote about how brands of water-soluble dye stains sold to the woodworking community differ. One of the differences is the degree to which they can be redissolved and lightened by wiping over with a wet cloth....

‘Water-white’ – What That Means in Finishing

You may have come across the term “water-white” for describing finishes. It’s a little confusing. It means a finish that is totally devoid of amber coloring in liquid form. The finish looks like water in the can. It doesn’t look white. In practice, the term is used to describe a type...

Use a ‘Nail Board’ to Speed Finishing Work

Here’s a finishing trick you may not be familiar with. You can brush or spray both sides of flat panels and cabinet doors without having to wait for one side to dry by using a nail board – except I used drywall screws instead of nails. These screws have very tiny...

Finishing in Colder Temperatures

We’re well into winter now, and you may have noticed that your finishes seem thicker. Thicker finishes are more likely to orange peel or leave brush marks. You can deal with this by adding thinner, but this will reduce the build of each coat. It’s better to be sure your finishes...

Stir the Finish – Unless it’s Gloss

I have a confession to make. No one knows I did this, at least no one who speaks English, not even my wife. But you are about to know it. In 1974 my wife (who is Danish) and I moved to Denmark to try to live there. Things were not good...

Finish for Maloof-style chair

I got a call from a fellow who made a Sam Maloof-style chair and screwed up the finish using Maloof’s formula. I thought, how can you screw up a Maloof finish? Maloof combined three products – polyurethane, linseed oil and tung oil – to give him the look he liked on...

Traditional Danish Workbench

I was thrilled to see the article by Bill Rainford in the current issue of Popular Woodworking Magazine in which he gives directions for making a traditional Danish workbench. It’s been a long time (more than three decades) since Tage Frid provided these directions, and lots of new people have taken...