In Shop Blog, Woodworking Blogs

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

I turned this mushroom piece out of walnut on Friday afternoon without a wine bottle close by, so I guessed on the inside diameter of a bottle when I was tapering the section that goes into the bottle.

As you can see, I guessed wrong.

No worries. While it does technically fit and seal the bottle, it sits too high. Consequently, as I taper the lower section so that the base of the mushroom rests on the top of the bottle, the rest of the proportions will be too big. The base will probably be too wide, as will the head of the mushroom.

So I brought in a bottle to the shop. I’m going to use this mushroom as a prototype, and I will examine the steps it will take to make a more refined design, at least to my eye. I’ll also include some video that will show some of the steps, especially the carving.

By the way, with the holidays fast approaching, small projects like this make great gifts. Check out this book, “Wood Carving Basics,” which is currently on sale in our store, saving you 80 percent!

– Ajax Alexandre

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts
Showing 2 comments
  • Ajax Alexandre

    Thanks, Jonathan. I used a die grinder with a carbide bit. I’m going to post some video soon with a demonstration.

  • Jonathan Szczepanski

    Ajax –
    You don’t need a smaller stopper. You need a bigger bottle!

    I like the texture on the top. Very nice. How did you create the texture?


Start typing and press Enter to search