Dugout Chair: Fastening the Seat

Every step of making this dugout chair has been a little weird. Fastening its seat in place was no different. After cutting the seat to shape using using the help of ticking sticks, I rasped the rim of the seat until I could wedge it inside the trunk and get it...

Dugout Chair Part 8, The Inner Bark

Today I got smart and worked on this dugout chair before I took a shower – genius. Also, I found an easier way to remove the inner bark – with a chisel. Last night after dinner I went out to look at what one blog commenter has called “about the ugliest...

Dugout Chair Part 7, The Bark Flies

Before I could strip the bark off the dugout chair, I needed to shape the chair’s back. The bark had all my layout marks indicating the final shape of the chair. Armed with the TurboPlane, I smoothed out the steps I had cut into the stump earlier with my chainsaw. When...

Dugout Chair Part 6, Remove the Rot

My progress on the dugout chair has been stymied by rains from two hurricanes, building two Campaign bookshelves and laying out a forthcoming book on carving by Mary May. But today I fired up my angle grinder to remove the rotted interior of this silver maple. I don’t have a ton...

Dugout Chair Part 5, Ready for Sculpting

After sculpting the backrest of this dugout chair with a chainsaw, I noticed two things. One, the chair is about half the weight when I started. I can move this thing around by myself with some grunting. Two: It’s now a rocking stump. Yup, after removing a lot of waste from...

Dugout Chair Part 4, Cut the Arms

I laid out the shape of my my dugout chair in chalk. Then it rained. The next day I laid out the shape of my dugout chair in lumber crayon. Referring to my CAD drawing (below), I drew in the seat at 17” from the ground. Then decided to put the...

Dugout Chair Step 3: Draw a Chair

After removing the big chunk of wood that was to become the front of the chair, the next steps on the dugout chair are the tricky parts that require more thinking than straining. I needed to chainsaw the bottom of the stump level to get the thing so it had the...

Dugout Chair Step 2: Lose 200 Ugly Pounds

I can roll this rotted log around my driveway for the dugout chair. But danged if I can lift it by myself. So the next step is to start chainsawing away the majority of the bulk that is not part of the finished chair. With my tiny 16” electric chainsaw I...