Learn Blended Woodworking At the Marc Adams School of Woodworking
Everything I know that is worth a darn was taught to me by someone else who knew their stuff , planing, sawing and all my machine skills came from other woodworkers to whom I owe a huge debt. I try pass this knowledge on to our readers in the magazine, but sometimes it’s quite frustrating because of the limited space and the format , words and still photos. Showing someone face-to-face how to shoot an edge square is simple; telling them about it in words and pictures is a challenge.
That’s why I’m particularly pleased to tell you that I’ll be teaching a class May 8-12 at the Marc Adams School of Woodworking outside Indianapolis. In this five-day class we’ll be exploring how to blend hand and power tools to add accuracy and speed to many woodworking operations. These techniques work. The cabinet on the cover of the newest issue was built in less than 20 hours of shop time. And I was proud to sign the work as my own.
Despite the bravado of my sentences above, I’m a bit humbled by this teaching job. If you browse around the list of instructors that Marc Adams hand picks, you’ll see what I mean. Heck, there are about a dozen class at the school in 2006 that I want to enroll in. But I’m going to give this my all. I’ve put a lot of thought into a curriculum that ties together many of the threads and themes you’ve seen in Woodworking Magazine. For information about the details of the class, visit this page about the curriculum.
As a preview, here are objectives of the course. If you have any questions, you know that you can of course email or call me. I’ll be happy to chat with you about it.
Course Goals & Objectives
Wielded correctly, hand tools can make your work faster, your joints tighter and your sanding chores almost non-existent. The key is to select the right tool for the job, set it up correctly and use it properly. In this class you will learn to blend hand tool and machine operations in a way that fully exploits the strengths of every tool and machine. During the five days we are going to focus heavily on the bench plane system, mortise-and-tenon joints, drawboring, wedging, nailing and some curved work. To learn all of the principles of this system, you’ll build a traditional sawbench/mortising stool from longleaf pine that will , at the end of the class , unlock yet another frontier of woodworking for you to explore in your shop at home.
Woodworkers of all skill levels are welcome; the only prerequisite I ask is that you have very basic sharpening skills. In a nutshell, here is what we will be covering during our five days together:
– Understanding bench planes. How to set up a fore plane, jointer plane and smoothing plane properly. We’ll cover proper blade shapes, how to use the tools in the correct order, when to switch from one tool to the next and the proper strokes to develop flat stock. You’ll learn how to incorporate machine jointers and planers into our work with bench planes so that your stock is flatter than most machines can make it, and it does not require power sanding. We’ll also cover sharpening and using card scrapers and the politics of hand sanding.
– Advanced bench plane techniques. You’ll learn to flatten glued-up panels, plane frame-and-panel assembles in a smart manner (no need to learn to plane around corners), fine-fit cabinet components with your bench planes, make tapered cuts for door and drawer fitting, lengthen moulding, planing identical widths/thicknesses, edge-jointing and springing joints.
– Forgotten tools. You’ll make your own drawbore pins and wedge-cutting sled, which will unlock two of the hot-rodding tricks used by traditional woodworkers that virtually eliminate the need for a shop full of clamps and downtime waiting for glue to dry. Plus, these two techniques produce joints that are mechanically superior.
– Mortise-and-tenon joinery. We explore the most fundamental joint in woodworking and learn to blend hand and power tools to make these joints extremely fast, fit like a glove and stronger than necessary. We’ll explore five traditional methods for making mortises by hand and two that incorporate machinery.
– Sawing. With your sawbench complete, you’ll learn to properly use a Western saw, which will unlock the next phase of your journey.