In Chris Schwarz Blog, Handplane Techniques, Handplanes, Sharpening, Woodworking Blogs

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

Anything – a-n-y-t-h-i-n-g – that reduces the time I spend sharpening my tools makes me giddy. Care Bear giddy. Monchichi giddy.

Making tools dull is more fun.

A few years ago I found a way to use a thin ruler to help me stone the faces of my card scrapers. It’s an adaptation of David Charlesworth’s ruler trick, and I documented the process on a DVD, “Handscrapers: Understanding, Preparing and Using the Ultimate Finishing Tool.”

It is a great trick and reduced the time I spend preparing a new card scraper to minutes instead of hours.

A couple weekends ago as I was teaching a handplane class with Deneb Puchalski (let’s say it together now: Poo-HALL-ski) of Lie-Nielsen Toolworks, and he showed me how he had tricked out my little trick.

It uses the same ruler, but you do two things differently. One, you pinch the ruler and the scraper together in a sandwich. Two, you place a block of wood on the scraper and apply pressure on the cutting edge.

This cuts your stoning time in half. And it makes it easier to stone thin card scrapers. If you don’t use the block of wood, you need to move your fingers around on a thin scraper to get the entire edge stoned – otherwise you will stone only the areas under your fingertips. The block of wood applies consistent pressure.

I prepared this short video that demonstrates my earlier method and the improved one. Thanks Deneb. I owe you (another) beer.

— Christopher Schwarz

• Speaking of Lie-Nielsen Toolworks, I’ll be teaching a weekend class in their workshop in Warren, Maine, on how to make chisels, handplanes and saws work together – and we’ll be building an English Square. Click here for more details.


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts
Showing 10 comments
  • phoenixwood

    Does it matter what type of stone you use to do this trick?

  • Stumper

    Instead of a metal ruler, I use a strip of .040″ styrene and it works great. Also, I imbedded a couple rare-earth magnets in a strip of hardwood and use that to hold the scraper while flattening the scraper on the stone.

  • Richard

    L-N has a six inch ruler for $3.00, and they advertise it as being ideal for the ruler trick.

    Another option is a six inch ruler made be General. I think the part number is 300/1. It’s available at most hardware stores and lumber yards and sells for about $3.00.

  • Dean

    Here’s William Ng’s method of sharpening card scrapers.

    http://thewoodwhisperer.com/scraper-sharpening-w-william-ng/

  • Steve_OH

    In my experience, the block that you use to apply pressure to the edge of the scraper has to be really, really flat. Otherwise, you get a nice impression of any irregularities in the scratch pattern…

    -Steve

  • macmarty15221

    This method seems to involve stoning the face of the ruler as well. All of my small rulers have scales etched on both sides, and I don’t want to polish that away. What’s a fella to do in this case? (Get a cheesier ruler? Use a Small Strip of Something Stainless?)

0

Start typing and press Enter to search