In Chisels, Chris Schwarz Blog, Personal Favorites, Woodworking Blogs

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

Carpenter and woodworker Carl Bilderback never flattens his oilstones. And they are both dead flat – I couldn’t get a .00125” feeler gauge under a straightedge that I laid on the stones.

His stones aren’t magic. He simply knows how to dance.

The trick to keeping your stones flat is in how you hold the tool and how you work the stone. As we were getting ready for our Lie-Nielsen Hand Tool Event this morning, Carl showed me how he’s kept his stones flat for 25 years and I shot the above video.

— Christopher Schwarz


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts
Showing 7 comments
  • HowardS

    I like the dancing method! I think flat to .0125 is good for chisels but for other tools flatter is better. Straight razors, for example, would develop problems from that level of flatness but they’re examples of extreme honing due to the edge being .001 thick.

    I’ve always recommended using the whole stone to people but it seems almost to be a natural tendency to use the center 80% of the stone. Carl himself says his stone is a bit dished.

    Overall, I like the dance method!

  • David Keller

    Chris – What Carl is showing you is the traditional method used for sharpening carving tools. Specifically, you are taught to lock one’s arms and wrists to your body and move the tool on the stone by moving your lower body. One of the reasons for doing this is that with the complex shapes of carving tools, it’s dang near impossible to produce a consistent bevel throughout the radius of the tool without the control produced by the “dance”. Carl has simply applied this idea to cabinetmaker’s chisels (and it’s a good one).

  • Eric R

    With stats like that after 25 years, old Carl must know his stuff.
    Thanks Chris.

  • B Jackson

    Makes sense to me to do likewise with water stone. Am I on the right track?

  • griffithpark

    OK. This may explain the traditional/old Japanese preference for sharpening with a figure-8 motion.

0

Start typing and press Enter to search