In Shop Blog, Tricks of the Trade

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

hanging glue up rack

I mounted this towel-bar style rack on my shop wall for the times when I need to clamp up a small panel. It takes up very little shop space. To make the rack, you’ll need two 1/2″ floor flanges, two 2″ x 1/2″ pipe nipples, two 1/2″ 90° elbows, a 36″ x 1/2″ pipe, and as many 3/4″ tees as you like. My rack is 36″ long, but you can make it any length. The mounting pipe is 1/2″ dia. The tees are 3/4″ dia. so they’ll slide to wherever they’re needed. If you’re using more than two clamps, you’ll have to do a little adjusting to get their heads to line up perfectly.

—Ray Pruett


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts
0

Start typing and press Enter to search

tool review bessey gearklamp