Archives

While lounging at the pool one afternoon, I had an inspiration. I “borrowed” one of my kids’ floating pool noodles, cut it into sections and used the pieces as universal connectors for vacuum [...]

There’s no single surface in my shop that’s the ideal height for every job. With my adjustable-height sawhorses, I can quickly set up an outfeed table, drawing table, or assembly table at [...]

I’ve had trouble making square and smooth edges on face frame parts, but this planer jig solved all my problems. It produces accurate and consistent results. For the jig’s base, cut T-slots in a [...]

My finishing turntable is perfect for spraying large parts or projects. To make the device, I mounted five fixed 3-1/2” casters on a plywood panel. They’re equally spaced in a 16” diameter [...]

Flaming Scroll Saw When I work in my garage shop, I keep the garage door open to let the sunlight stream in. After working for several hours one fine afternoon, I smelled something burning—that [...]

My task: 28 kitchen drawers of different sizes, all with hand-cut dovetails. The thought of laying these out was overwhelming, so I designed a jig to simplify the process. To make the jig, [...]

I buy glue in gallon jugs and, having tried about every glue bottle on the market, I thought I would never find the perfect one. My search ended while washing dishes with my wife one evening.  [...]

Frustrated with my vise’s inability to hold odd-shaped pieces, I tried many solutions: v-notched face plates, cork, bubble wrap, leather, etc., but to no avail. One day I pulled an old mop out of [...]

Like most people, I keep lots of different screws, bolts, nails, washers, and other small parts in bins. Instead of paper labels, I hot glue a sample of the actual part on the outside of the bin. [...]

Separate, sort, and see your collection With just five different parts to make, this easy-to-build caddy accommodates bits with both 1/2″ and 1/4″ shafts. It can be customized to [...]

Watching an expensive router bit roll onto the floor is a heartbreaking experience. In the middle of a project, it can be a disaster. I drilled a few 1/2” and 1/4” holes in the edge of a piece of [...]

Bottle Cap Jig Knobs I’m always trying to use up scraps and stuff that would otherwise end up in the trash. My latest devices are jig knobs made with plastic bottle caps, which have a grippy [...]