In Questions And Answers, Techniques

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

A Bead in any Board

Click any image to view a larger version.

I wanted an antique beadboard look for my cabinet doors, but stock beadboard didn’t work out with my door size. Here’s what I came up with: I glued up a solid door and cut 3/16-in. x 3/16-in. dadoes at each glue joint.Then I chamfered the edges with a sanding block (or you could use a plane).Finally, I ran a thin bead of glue in the bottom of the dadoes and laid in 3/16-in. dowels. Could it be any simpler? Now I can have any width beadboard I need and I’m not limited to the wood species available at the lumberyard. I have a few more ideas to try; like using rope instead of dowels.

This story originally appeared in American Woodworker September 2002, issue #95.



September 2002, issue #95


Purchase this back issue.

 


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts
0

Start typing and press Enter to search