Clamp Traction Pads - Popular Woodworking Magazine

Clamp Traction Pads

 In Projects, Questions And Answers, Techniques





My spring clamps wouldn’t work on an acute-angle joint I needed to clamp. Even though their jaws had swiveling pads, the clamps just slipped off.


Nothing worked to hold the clamps in place until I made my own traction pads by gluing strips of coarse abrasive together back to back. When the glue was dry, I cut the strips into squares and stuck them between the clamp pads and the wood. 





Recommended Posts

Start typing and press Enter to search