In Projects, Questions And Answers, Shop Blog, Sketchup With Joe Zeh, Techniques

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

the_leg Today we are going to model the legs of the Shaker Stool. Modeling the legs requires close and careful attention to the compound angles and the off axis planes you will be working with. Pay close attention to details such as how construction lines are placed. We will model this leg much like you would turn it on the lathe. It will be longer than needed until we cut it to size to sit on the floor and trim them flush with the seat. Again I will demonstrate this modeling effort in a video. Grab the popcorn, sit back and enjoy the show.

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts

Start typing and press Enter to search