In October 2007 #164, Popular Woodworking Magazine Article Index

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

Material and finish choice help dictate grit progression.
By Bob Flexner

Pages: 79-81
From the October 2007 issue #164
Buy this issue now

The objective of sanding wood is to remove mill marks, which are caused by woodworking machines, and to remove other flaws such as dents and gouges that may have been introduced in handling. The most efficient method of doing this is to begin sanding with a coarse enough grit of sandpaper to cut through and remove the problems quickly, then sand out the coarse-grit scratches with finer and finer grits until you reach the smoothness you want – usually up to #150, #180 or #220 grit.

This is a very important concept because it gets past all the contradictory instructions about which sandpaper grits to use. Conditions vary.

From the October 2007 issue #164
Buy this issue now


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts
0

Start typing and press Enter to search