by Bob Flexner
It’s easy enough to provide instructions for applying finishes. But in the real world, things go wrong; problems occur that you have to deal with.
With the combined goals of defining the problems, providing ways to avoid them, then fixing them after they occur, here are a baker’s dozen of the most common application problems in alphabetical order.
Bleeding in oil finishes: the oil bleeds out of pores after any excess oil has been wiped off.
■ To avoid, continue wiping off every half-hour or so until the bleeding stops.
■ To fix, if the bleeding has dried, disguise it by sanding or rubbing with steel wool, and apply another coat – or strip and start over.
Bubbles dry in brushed alkyd or polyurethane varnish: more likely in hot weather.
■ To avoid, work in cooler temperatures.
■ To avoid, “tip off” (use light passes while holding the brush nearly vertical) after each couple of strokes to break the bubbles.
■ To avoid, add 5-10 percent mineral spirits (paint thinner) to the varnish so the bubbles are more likely to pop out on their own.
■ To fix, sand level and apply another (thinned) coat.
Articles: You’ll find many free finishing articles on our web site.
In Our Store: “Flexner on Finishing” – 12 years of columns illustrated with beautiful full-color images and updated, and “Wood Finishing 101.”
From the June 2014 issue, #211
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.