I’m a big fan of cut nails. They hold far better that modern wire nails and they really have the right look when it comes to building reproduction furniture, which is why I don’t use square-drive brass screws when installing reproduction hinges.
However, cut nails can sometimes be difficult to find. Tremont Nail is an excellent source of the full line of cut nails. The company ships orders promptly, though it can take a week to get your goods. If I need them a bit faster I can usually get a bag of the common sizes and configurations from my local Rockler , a 40-minute drive from my house.
So last week, Managing Editor Megan Fitzpatrick and I were at the local Lowe’s and Home Depot picking out some wood for our “I Can Do That” column in Popular Woodworking. The column is a blast for us to put together each issue. Here are the rules: You build a project and can use only hand-held power tools (jigsaw, miter saw, pocket hole jig) and , here’s the kicker , we only use raw materials from the home centers. No mail order. No secret stashes of wood or special hardware. It’s all off the rack.
So I really wanted some cut nails for a project we’re working on for the February 2007 issue. So we’re rooting around in the fastener section and lo and behold, I see them. Grip Rite Hard Cut Masonry Nails (or, as the box also indicates, “clavos cortados para albanileria”). They are honest-to-goodness cut nails and are available in 8d (2-1/2″) and 6d (2″) lengths. They’re too big for finery, but for large-scale nailing, they’re perfect. Grip Rite also makes a Hard Cut Flooring Nail that is a traditional cut nail that you might want to look for in your area.
After doing some research, I did dig up a few differences you should be aware of. The masonry nails have a smooth surface finish, whereas many of the Tremont nails (such as the most excellent fine finish nail) have a rough surface. Tremont says the rough surface gives the nail some more grip.
The other difference is that the masonry nails are made from high-carbon steel and are hardened. The fine finish cut nails are low-carbon steel and are not hard. This difference has advantages and disadvantages. You’re much less likely to bend the masonry nail when driving it. But you also can’t clench the masonry nail, which is when you bend the tip as it emerges out the other side back into the work. The fine finish nails clench readily.
So I walked away from the home center well-pleased with my find. Now if I could only find pod augers at Home Depot, I’d be really happy.
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.