In Chris Schwarz Blog, Handplane Techniques, Handplanes, Sawing Techniques, Saws

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

This weekend I assisted Thomas Lie-Nielsen during a class on handplanes at the Marc Adams School of Woodworking. Thomas brought along some of the new tools they are working on and talked to the class about new tools in the pipeline in Warren, Maine.

Here are some details:

Panel saws: Lie-Nielsen is starting to ship its first panel saws. Yes, it’s true. I first saw the prototype for this saw about eight years ago when Rob Cosman was using it at the Woodstock woodworking show. Since that prototype, the saw has evolved considerably.

It has a taper-ground sawplate, a nib at the toe and a gorgeous curly maple handle with a lamb’s tongue detail. Thomas brought the saw in a nice leather holster. I didn’t get a chance to try out the tool, so now you know everything I do about the saw. More details to follow.

Tongue and groove plane: Lie-Nielsen is also starting to ship these planes. I got to use a prototype of this tool a couple years ago when we were shooting the “Workbenches” DVD. The production version of this tool is far and away better than my original Stanley No. 48.

Instead of two irons that you have to fiddle with to get exactly even, the Lie-Nielsen version has a single iron that is forked. Also, the fence on the Lie-Nielsen is more robust than on the Stanley and moves very little.

I made some joints with this plane during the weekend in hardwood and was impressed. While my No. 48 struggles in hardwoods, this tool had no problem in oak or maple.

O1 Steel: Thomas mentioned a couple times during the weekend that he was hoping to offer some more tools with high-carbon oil-hardened steel. For the most part, Lie-Nielsen uses A2 steel in its blades, but some customers prefer O1, especially for tools that require a low sharpening angle, such as paring chisels and blades for some low-angle planes.

Speaking of paring chisels, those are also on the drawing board.

Workbench hardware:
Lie-Nielsen has begun making its own workbench hardware. Thomas brought along a new tail vise assembly to show, and it was sweet looking. Thomas says it’s much faster to install and won’t droop over time. It also has another surprise, but I’ll have to save that for another post.

One final tease: Thomas says he has a load of beech that he’s letting dry.

I’m sure I’ll hear more details at the Lie-Nielsen Hand Tool Event in Chicago this weekend (Friday and Saturday). If you’re in the area, stop by at this free show, say hello and you can see some of this stuff for yourself.

One final thing. To the student this weekend who brought me a six pack of Bell’s Two-hearted Ale: Thanks! My wife thinks I’m getting a reputation as a lush because whenever I go out of town to teach I come back with a trunk full of alcohol.

Is this bootlegging? And is it a bad thing?

– Christopher Schwarz

Looking for More Woodworking Information?
– Sign up for our newsletters to get free plans, techniques and reviews HERE.
– Looking for free articles from Woodworking Magazine? Click HERE.
– Like hand tools? Read all our online articles on hand work HERE.
– Want to subscribe to Woodworking Magazine? It’s $19.96/year. Click HERE.

Product Recomendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts
Showing 8 comments
  • Junior

    thanks for the heads up on the LN saws. I saw Cosmans years ago, but it was kinked so i never got to use it. As soon as i heard they were shipping i ordered a rip right away(I had to convince the girl that they were available to order).
    can’t wait to get my hands on one.

  • David Cockey

    Three new tail vices in a a year r so, and each a "new" design.
    1) Benchcrafted wagon vise (November 2008)
    2) Lie-Nielsen tail vise (Spring 2009)
    3) Lee Valley tail vise (due Fall 2009)
    I wonder the last time that happened, certainly not in the last 50 years.

  • Rob

    Doh – Typo

  • Rob

    Hi Chris –

    The two hearted ale is good, but there are so many others. Larry Bell is an old friend of mine from my days in Kalamazoo. I’ll be in Cinci at the hand tool event and will bring a "care package". After you introduced me to your bench at the Sindelar museaum a couple years ago, I owe you one (or six).

    – Rob (from Hoosierville)

  • tom fidgen

    Thanks Chris,
    You must have been using your ‘Schwarz’ telepathy for this one…I e-mailed Patrick over at LN yesterday morning asking about the status of these!
    -ditto on the comment above…I’d much rather a natural maple finish than the wood stain they presently use on their handles.

    Tom Fidgen

  • Old Baleine

    Great news about the LN panel saws; I can’t wait. I sure hope they don’t dye the maple orange like they have with so many of their maple-handled tools.

  • Jonathan Crone

    Well Chris, as I’ve emailed in the past, the folks at
    Rosewood Studios here near Ottawa have a gorgeous
    woodworking site, and there is the fine microbrewery
    next door…

    Not being a consumer of alcohol myself I can’t
    comment, but all the other students sure seemed
    to approve. An excuse to convince you to
    come north of the border (eh?)
    There’s more than coffee and donuts 🙂

  • Matt Gray


    Your welcome for the sixer….just remind the wife that you can never have too much Bell’s!

    Thanks for a great class.



Start typing and press Enter to search