<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=376816859356052&amp;ev=PageView&amp;noscript=1">
 In Featured Article

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.


Delta re-invents its flagship table saw with great success. Bravo.
By Glen D. Huey
Page: 28

From the August 2009 issue #177
Buy this issue now

There’s been so much written about Delta’s new Unisaw that it’s difficult not to repeat the information for a second or third time. But many of the design changes are significant enough to point out once again.

The most noticeable changes are right up front. Both the height-adjustment and angle-bevel cranks are located on the front of the saw. The crescent opening on the older Unisaw that allowed the height-adjustment handle to move as the bevel angle was changed is gone. Both cranks are fixed.

But that’s not the entire story. Never have we operated a saw with adjustments as easy to turn as these. The motion is as smooth as good ice cream on a summer day. And when you lock the handles, they are locked tight. Also, there’s no backlash in the setup.


From the August 2009 issue #177
Buy this issue now


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts

Start typing and press Enter to search