In August 2005 #149, Popular Woodworking Magazine Article Index

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

A small router takes the drudgery out of half-blind dovetails.
By Scott Gibson
Pages: 76-80

From the August 2005 issue #149
Buy this issue now

It’s hard to blame anyone for turning to a router and template when the job calls for a kitchen’s worth of dovetailed drawers. If nothing else, the process is fast. Once you’ve fine-tuned the router settings, you can knock out a lot of drawer boxes quickly and with perfect regularity. And that’s the problem – all that regularity makes for boring joinery.

Boring and uniform: With many dovetail jigs, the spacing of tails and pins is fixed, and those pin-to-pin dimensions don’t always coincide with actual drawer heights. Templates that allow adjustable spacing are an improvement, but pin width and slope are fixed by the shape of the router bit, and bits may have thicker profiles than you would like.

From the August 2005 issue #149
Buy this issue now


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts
0

Start typing and press Enter to search