I Can Do That: Simplified Stickley Bookcase | Popular Woodworking Magazine
 In November 2009 #179, Popular Woodworking Magazine Article Index

Great design and hidden screws make this a must-build project.
By Glen D. Huey
Pages: 30-31

From the November 2009 issue #179
Buy this issue now

If you’ve perused the pages of our sister publication, Woodworking Magazine, you might have seen this piece in the Spring 2005 issue. We dug through the archives to find a fine bookcase, then did a bit of construction modification to allow the design to better fit the “I Can Do That” column. And that’s something you should be on the lookout for as you read woodworking articles or skim the pages of your favorite catalogs. Find a piece you like and see what changes can be made to match the construction to your skill set and tools.

For this piece, we eliminated the complicated shelf joinery, and we adjusted a few sizes to better accommodate the lumber dimensions found at home centers. But by and large, this bookcase is close to our originalproject and a great piece to build.

For material, you’ll need an 8′ piece of 1 x 10 for the sides and one shelf, and a 1 x 10 x 4′ for two shelves, the braces and one toe kick.Crosscut the material to the required length, then rip the braces and toe kick.

From the November 2009 issue #179
Buy this issue now

Recommended Posts

Start typing and press Enter to search