<img class="lazy" height="1" width="1" style="display:none" src="data:image/svg+xml,%3Csvg%20xmlns='http://www.w3.org/2000/svg'%20viewBox='0%200%201%201'%3E%3C/svg%3E" data-src="https://www.facebook.com/tr?id=376816859356052&amp;ev=PageView&amp;noscript=1">
 In Featured Article

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

Strong and versatile, this joint is simple to make with a router.
By Bill Hylton
Pages: 30-32

From the December 2004 issue #145
Buy this issue now

For the woodworker who builds furniture and cabinets, the sliding dovetail is a joint well worth mastering. It’s strong and versatile, with myriad applications, from case construction to leg-and-rail joinery.

I’m sure you’ve seen drawings of the joint. It’s a hybrid of the dado and the dovetail, with a groove in one part and a tongue on the other. Naturally, the tongue fits the groove. But because both the groove walls and the tongue sides are angled like a dovetail, the joint has to be assembled by sliding the tongue into the groove from one end. There are several advantages here.

From the December 2004 issue #145
Buy this issue now

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts

Start typing and press Enter to search