In Featured Article

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

Ignore the naysayers. This jig produces square, sharp edges every single time.
By Christopher Schwarz
Page: 28

From the October 2004 issue #143
Buy this issue now

Many of my fellow hand-tool users give me a rash of grief about my simple side-clamp honing guide, which has been a fixture on my workbench since 1993.

“Isn’t it time you learned to sharpen properly?” they ask. And then they rattle off a list of the advantages of sharpening freehand:

• Freehand is faster because you don’t have to set up a jig every time you sharpen.

• You remove less metal with freehand sharpening so your hand tools will last longer before they’re used up.

• Freehand sharpening produces edges just as sharp as those produced with a jig.

• The side-clamp jig won’t work for odd-shaped or very short tools.

• Sharpening with a jig is just for beginners. Real hand-tool users can sharpen without this little one-wheeled crutch, they say.

From the October 2004 issue #143
Buy this issue now

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts

Start typing and press Enter to search