In April 2009 #175, Popular Woodworking Magazine Article Index

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

These saws are the best for breaking down sheet goods, if that’s one of your shop chores. But you’ll need to dig into the features to make your purchase decision.
By Glen D. Huey
Pages: 50-53

From the April 2009 issue #175
Buy this issue now

Since DeWalt and Makita entered the United States plunge-cut saw market with Festool, the three have received immense interest and discussion. How are the saws different? Are the results of a crosscut or rip cut any cleaner than those made at a table saw? What features are common or unique on plunge-cut saws? I scrutinized a DeWalt DWS520, a Festool TS55 and a Makita SP6000 to see which, if any, of the saws stand out.

If you’re looking for vast differences in the cuts produced by the various plunge-cut saws, I’m afraid you’re going to be disappointed. I used each saw to cut plywood and hardwood, both with and across the grain, and for slicing samples of melamine. There is a small amount of tear-out (mostly across the grain as you might expect), but nothing significant. In fact, I compared those cuts with cuts made in the same materials at a table saw and again, the differences are minimal.

From the April 2009 issue #175
Buy this issue now

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts

Start typing and press Enter to search