In April 2005 #147, Popular Woodworking Magazine Article Index

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

There are many ways to cut this popular edge-to-edge joint.
By Bill Hylton
Pages: 86-88

From the April 2005 issue #147
Buy this issue now

A tongue-and-groove joint is an edge joint with a mechanical interlock. The edge of one board has a groove. A matching tongue is formed on the edge of the mating board. The tongue goes into the groove, and the boards are joined.

You probably are most familiar with the joint’s many applications in building construction, such as strip flooring and paneling. In furnituremaking, the tongue and groove is excellent for edge-to-edge glue-ups. If cut precisely, the joint ensures that the faces of adjoining boards come flush easily and that they can’t creep out of alignment as you position and tighten clamps. When the clamps come off, a little scraping and hand-sanding is all that’s needed before moving on.

From the April 2005 issue #147
Buy this issue now

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts

Start typing and press Enter to search