In American Woodworker Blog, Projects, Questions And Answers, Techniques

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

Carving the chair's crest rail was fun, and I think that adding the scroll detail improved it. The next step was to glue the parts together. In some cases, where parts were not disconnected but just loose, I injected glue in between the tenons and the mortises; I used liquid hide glue throughout the proses. To inject glue in between tenons and mortises I drilled a hole and inserted a syringe to force the glue in.

 

 

 

 

After the glue dried I sanded the chair and applied two layers of polyurethane clear finish.

 

 

 

 

 

 


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts
0

Start typing and press Enter to search