In American Woodworker Blog, Finishing, Techniques

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

PWE151018_Poly500pxQ: I plan to finish a kitchen table with polyurethane for durability. Should I use water-based or oil-based poly?

A: If you’re looking purely at durability, then an oil-based polyurethane is still superior, but only marginally. There used to be distinct differences between water- and oil-based polyurethanes when it came to durability. Today, the differences are fairly minor.

Oil-based poly will be slightly more resistant to scratches, moisture and heat when compared with water-based poly.

So, why use water-based when oil-based offers improved protection? There are three primary considerations: color, odor and drying time. Some woodworkers dislike the yellow cast oil-based polyurethane puts on white woods, such as maple. In general, a water-based polyurethane will not add color to the wood and will preserve the wood’s natural tone. On woods such as cherry or walnut, this can be a disadvantage, because a straight water-based finish can make the wood look cold and uninviting. That’s why finishers often use a seal coat of dewaxed shellac to impart color and warmth before they put on a water-based finish. Another consideration is odor. Water-based polyurethane will give off little if any odor compared to oil-based poly—a real issue if your finish room happens to be in your basement. Finally, water-based poly dries a lot faster, giving dust less time to settle out of the air into your finish.


Product Recomendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts
Showing 2 comments
  • Brian

    Have used the water-based finishes and glad of it. They ‘lay’ better, have quicker dry times and are much less restrictive to those with . . . nose sensitivities. Here in our shop we’ve done the research, tested several variations of several brands and now prefer GENERAL FINiSHES, Enduro-Var. A great product.

  • Lon

    You should list price as a consideration too, since the water-based polys are usually (always?) more expensive. Maybe just a little more expensive in the Varathane brand, but in Minwax the water-based is almost twice the price (48/gal vs 26/gal), and you almost need a second mortgage to buy General Finishes water-based polys (72-98/gal).

0

Start typing and press Enter to search