In American Woodworker Blog

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

 The "Other Half" wanted a small Prep table for the kitchen.   I had a plank of Oak out in the shopabout 13-1/2' wide.  I clean the old boy up, trimmed off the beveled edges to get things down to fit my 12-1/2" planer.  I had a few other old boards, and made a base for this plank to sit on.Next, I took all the parts back to the house, where there was some heat, at least.   I added a few details, just to dress things up a bit.    Like a bread board edge, and a bead board edging along the aprons.A spokeshave cleaning up the saw marks on the legs.     The edges under the aprons are notched to fit around the legs.  A hand powered mitersaw  was used to miter the corners.   A few nails here and there to hold things in place while the glue dried. next up, some stain and varnish.the box beside it is a Toy Box for a family friend.   More on that another time…   as for that "Hand-powered mitersaw"


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts
0

Start typing and press Enter to search