In American Woodworker Blog, Projects, Questions And Answers, Techniques, Workbenches

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

Bevel Gauge

For years I ground a way-too-shallow edge on my favorite chisel. It wouldn't hold up worth beans, so I dug through the junk drawer for something I could make a bevel gauge out of. What I came up with is this simple jig.

Just place the chisel's bevel into the angle formed by two plastic protractors and read the degrees on the protractor's face.

Jerry Lattimer

 

My Take

Cool idea! In case you don't have two protractors in your junk drawer, just cut the commonly used angles into a piece of plastic and use it as a bevel checker. If your tool's bevel is off, you won't be able to read its actual bevel, but that doesn't really matter. Here's what I find kind of funny, though; how does a chisel whose edge "doesn't hold up worth beans" become your favorite chisel!?


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts
0

Start typing and press Enter to search