Inlay & Marquetry & Bandings, Oh My

cb_bellflowersI’ve studied furniture from the 17th, 18th and early 19th centuries for decades and done my fair share of inlay (the table leg to the left is an example). When the talk around the office this week turned to Rob Millard’s much-anticipated DVD, “Marquetry, Veneer & Inlay for Furniture Makers” (buy your copy here), it brought up memories for me of Woodworking in America conferences past (learn more about WIA here…OK, I’m done huckstering for this post).

At my first WIA, in Valley Forge, Pa., I put together a Power Point presentation about inlay, stringing and marquetry. I also did demos on how to do those things as well as some sulfur inlay. If you’re unfamiliar with sulfur inlay (sometimes called poor man’s inlay), it’s a process that involves digging out trenches in the wood, smelling up your entire shop and/or house, by melting sulfur (it’s an element) and pouring the liquid into the trench. There’s more to it than that – but not much. Besides, it’s off topic. What I really want to do in this post is toss out a few photos of some old pieces that might just inspire you to learn a little about inlay and banding.

Sulphur inlay

Sulphur inlay on a Pennsylvania shrank

Adding some inlay, stringing or banding to your projects is a fun way to dress them up. It’s also relatively inexpensive unless you get into lots of exotic species. Sure it looks complex (and some of it is in the extreme) but with a few simple tools, techniques and some practice, just about any woodworker can successful.

Most people avoid inlay because they’re afraid they’ll ruin a project they’ve invested tons of time and money into making. Your best bet is to practice on scraps until you’re confident enough to try out the technique on a real project. It sounds simple, but I’ve talked to many woodworkers over the years to whom this idea just never occurred. I mean, you practice dovetailing on scrap first, don’t you?

Lunette edgebanding

Lunette edge banding on a tabletop.

No matter what level of experience you have, there’s always more to learn. Rob Millard’s work is pretty spectacular and having him here at the Popular Woodworking Magazine studio to film a DVD was both great fun and a tremendous learning experience. Glen D. Huey and I watched pretty intently as Rob filmed a section of the DVD on how to make a Seymour-style lunette banding. The hardest part for both of us was not walking on camera to ask questions.

If I have one word of advice to give to woodworkers, regardless of experience level, it’s don’t be afraid to ask questions. Glen and I both wanted to know why Rob did certain things the way he did. We wanted to know how he overcame certain problems that were inherent to the method he chose. We just had to wait for Ric (the director) to holler “cut!”

 –– Chuck Bender

p.s. All except the first photo are from period pieces.

 

8 thoughts on “Inlay & Marquetry & Bandings, Oh My

  1. renaissancewwrenaissanceww

    Nice post Chuck. I have tried Sulphur inlay once shortly after I saw you demonstrate it at WIA in 2009. (BTW, here is my recap of that lecture for those interested in some video from the event and my somewhat tiring narration)

    What you forgot to tell us during that lecture was how the wife would ban us from ever doing Sulphur inlay again once the smell filtered into the house. Granted in hindsight that seems like common sense ;)

    1. Chuck BenderChuck Bender Post author

      The fact that the Valley Forge Convention Center has not played host to WIA again , I’m sure, has nothing to do with that inlay demo and should have been your first clue not to try the technique indoors at home.

    1. Chuck BenderChuck Bender Post author

      JB,

      From what I observed during filming, Rob used a combination of hand and power tools. I inquired about the “make your own tools” bit and was told he uses tools that most people would have readily available in a reasonably equipped shop. In other words, he isn’t using much beyond a camp stove that you probably don’t already own. Any power tools I saw in use could easily be substituted with the appropriate hand tool (scroll saw can be replaced by jeweler’s saw without much difference in technique).

      As to what’s beyond the edge of the universe, depending upon which theory you subscribe, that would either be Dark Flow or the United Federation of Planets…

  2. Bill Lattanzio

    Interesting post! I’ve always wanted to attempt some real inlay yet I never actually try to do it. Sulfur is an element?! Who knew? But that video sounds like a good start. I may just have to order it.
    Bill

  3. bthompson10

    Chuck,
    I really like your writings. You write just like you talk. When I read your blog, I can tell it’s you before I see your name at the end. Your a great teacher so keep the blogs coming. Knock yourself out!!
    Bill

COMMENT