Comments on: For Accurate & Heavy Sawing, Try a ‘Shangie’ http://www.popularwoodworking.com/woodworking-blogs/chris-schwarz-blog/for-accurate-heavy-sawing-try-a-%e2%80%98shangie%e2%80%99 Woodworking advice, woodworking plans, woodworking projects and woodworking blogs Fri, 24 May 2013 02:04:06 +0000 hourly 1 http://wordpress.org/?v=3.5.1 By: frankgattahttp://www.popularwoodworking.com/woodworking-blogs/chris-schwarz-blog/for-accurate-heavy-sawing-try-a-%e2%80%98shangie%e2%80%99/comment-page-1#comment-22084 frankgatta Fri, 02 Dec 2011 23:55:44 +0000 http://www.popularwoodworking.com/?p=113496#comment-22084 I agree; this is a possible use of the nib. Dose the time period of the documentation coincide for the two references?

]]> By: franco88http://www.popularwoodworking.com/woodworking-blogs/chris-schwarz-blog/for-accurate-heavy-sawing-try-a-%e2%80%98shangie%e2%80%99/comment-page-1#comment-21947 franco88 Wed, 23 Nov 2011 16:35:33 +0000 http://www.popularwoodworking.com/?p=113496#comment-21947 The drawing took a bit of ogling to figure out. I seemed to me that the gadget and the saw were angled in the same direction (ie. parallel) and not crossways to each other as is necessary to work as described. This is an “eye of the beholder problem” isn’t it…..
Well, Happy Thanksgiving to y’all from down here in Texas.

]]> By: tsstahlhttp://www.popularwoodworking.com/woodworking-blogs/chris-schwarz-blog/for-accurate-heavy-sawing-try-a-%e2%80%98shangie%e2%80%99/comment-page-1#comment-21928 tsstahl Tue, 22 Nov 2011 03:23:45 +0000 http://www.popularwoodworking.com/?p=113496#comment-21928 “Doesn’t this effectively make the saw into “pull-saw”?”

Only about half the time.

*rimshot*

]]> By: John Griffin-Wiesnerhttp://www.popularwoodworking.com/woodworking-blogs/chris-schwarz-blog/for-accurate-heavy-sawing-try-a-%e2%80%98shangie%e2%80%99/comment-page-1#comment-21925 John Griffin-Wiesner Mon, 21 Nov 2011 20:05:13 +0000 http://www.popularwoodworking.com/?p=113496#comment-21925 The length of one’s stroke would be shortened by the length of the shangie wedge, which could be a bit of a down-side.

Seriously, Heh.

]]> By: Jonathan Szczepanskihttp://www.popularwoodworking.com/woodworking-blogs/chris-schwarz-blog/for-accurate-heavy-sawing-try-a-%e2%80%98shangie%e2%80%99/comment-page-1#comment-21918 Jonathan Szczepanski Mon, 21 Nov 2011 14:00:18 +0000 http://www.popularwoodworking.com/?p=113496#comment-21918 I hope it does.

Jonathan
=========================

]]> By: Megan Fitzpatrickhttp://www.popularwoodworking.com/woodworking-blogs/chris-schwarz-blog/for-accurate-heavy-sawing-try-a-%e2%80%98shangie%e2%80%99/comment-page-1#comment-21917 Megan Fitzpatrick Mon, 21 Nov 2011 13:38:34 +0000 http://www.popularwoodworking.com/?p=113496#comment-21917 Very nice.

]]> By: ecafsubhttp://www.popularwoodworking.com/woodworking-blogs/chris-schwarz-blog/for-accurate-heavy-sawing-try-a-%e2%80%98shangie%e2%80%99/comment-page-1#comment-21915 ecafsub Mon, 21 Nov 2011 04:28:53 +0000 http://www.popularwoodworking.com/?p=113496#comment-21915 My perception of woodworking continues to be challenged.

To the point I realized, while writing this post, that the term “woodworking” takes on a whole new meaning in the presence of such terms…*

‘scuse me a minnit thankyouverymuch

]]> By: Publius Secundushttp://www.popularwoodworking.com/woodworking-blogs/chris-schwarz-blog/for-accurate-heavy-sawing-try-a-%e2%80%98shangie%e2%80%99/comment-page-1#comment-21914 Publius Secundus Mon, 21 Nov 2011 01:46:58 +0000 http://www.popularwoodworking.com/?p=113496#comment-21914 Or Tristram Shangie, perchance.

]]> By: Publius Secundushttp://www.popularwoodworking.com/woodworking-blogs/chris-schwarz-blog/for-accurate-heavy-sawing-try-a-%e2%80%98shangie%e2%80%99/comment-page-1#comment-21913 Publius Secundus Mon, 21 Nov 2011 01:31:20 +0000 http://www.popularwoodworking.com/?p=113496#comment-21913 As in the Angle of the Dangle.

]]> By: tjahttp://www.popularwoodworking.com/woodworking-blogs/chris-schwarz-blog/for-accurate-heavy-sawing-try-a-%e2%80%98shangie%e2%80%99/comment-page-1#comment-21912 tja Sun, 20 Nov 2011 23:38:32 +0000 http://www.popularwoodworking.com/?p=113496#comment-21912 Doesn’t this effectively make the saw into “pull-saw”?

]]>