<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=376816859356052&amp;ev=PageView&amp;noscript=1">
 In Tricks of the Trade

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

If you enjoy making your own woodworking tools, as I do, here’s a good-quality marking knife you can create from a humble used-up spade bit and a small scrap of wood.

To make the knife, begin by grinding a 3⁄4″ spade bit to a V-shaped tip as shown, then grind the bevels on one face of the bit. When grinding, quench the metal occasionally in water or oil to prevent bluing it and drawing the temper. Then hone the bevels and opposite face of the bit to a mirror polish on sharpening stones. Then use a hacksaw to cut the round shank about 2″ long.

To make the handle, first cut a piece of stock to about 5⁄8″ x 1″ x 5″. (Here’s a chance to use some of that exotic scrap you’ve been hoarding.) Drill a 2″-deep hole into one end, then shape the handle for a smooth, comfortable feel. Epoxy the shank into the handle and you’re done – you’ve got a beautiful, functional marking knife that probably will outlive you.

Peter Giolitto


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts

Start typing and press Enter to search