The No. 4-1/2 Bench Plane
Sole length: 10″
Cutter width: 2-3/8″
What a difference an inch makes. The No. 4-1/2 is a little bigger than the No. 4, but that additional metal is a game-changer. The No. 4-1/2 smoothing plane is more popular now than it was when Stanley was the only game in town. Why is that? Good press. Lots of high-profile woodworkers have sung the praises of this size tool. And, as Americans, we also seem to like things that have been Super-Sized.
In truth, the No. 4-1/2 is an excellent size tool, though it’s more apt to wear me out faster because it’s heavier and has a wider cutter. So it requires more effort to push the tool forward.
Of course, the advantage of the wider cutter is that you’ll get the work done in fewer strokes, so that might be a wash. And the advantage of the extra weight is that the tool will stay in the cut with less downward pressure on your part. So it’s not the simplest of trade-offs to calculate.
I think the No. 4-1/2 is ideal for woodworkers who like a big and heavy plane (a legitimate preference) and those woodworkers who work on larger-scale furniture. If you build jewelry boxes, the No. 4-1/2 likely isn’t for you. If you build armoires, you’ll love it.
The No. 5-1/2 Bench Plane
Sole length: 15″
Cutter width: 2-1/4″ or 2-3/8″
No, this isn’t an error. I meant to put the No. 5-1/2 in the smoothing plane section. Despite the fact that the No. 5-1/2 is 6″ longer than a typical smoothing plane, I think a legitimate case can be made today that it serves as a smoothing plane more often than not.
Why is this? English craftsman David Charlesworth. Charlesworth has been a passionate advocate of setting up this sized tool as a so-called “super smoother” that is used in a modern shop to both smooth and straighten the wood. The No. 5-1/2 is midway between a jointer plane and a smoothing plane, which is why this arrangement works.
In a nutshell, the No. 5-1/2 is the same size as a historic English panel plane, a form of tool that was uncommon in the United States. English craftsmen would use a panel plane for smoothing large surfaces.
The modern No. 5-1/2 is a perfect companion to the woodworker with a powered jointer and planer and who doesn’t want to set up a bunch of planes. Here’s the drill: You dress all your lumber with your machines and then use your No. 5-1/2 to refine the stock; the No. 5-1/2 trues up the work more than the machines can and it smoothes the work simultaneously.
There are disadvantages to any “one plane” approach. The middling size of the sole makes it difficult for you to get into localized areas to remove tear-out (shorter tools do this with ease). Plus, the tool is difficult to use to shoot long edges for a panel glue-up – a real jointer plane makes this task simpler.
However, the No. 5-1/2 does handle more than 90 percent of your work-a-day chores if you own machines. I’ve worked the Charlesworth way on several projects and have found his methods to be correct and reliable.
A Veritas bevel-up smoothing plane.
Bevel-up Smoothing Planes
Sole length: 9-1/2″ to 10″
Cutter width: 2″ to 2-1/4″
The modern bevel-up smoothing planes have become quite popular recently. They are simpler tools (with no chipbreaker or movable frog), they’re less expensive than their bevel-down counterparts, and they are easily configured to plane at high angles that reduce tear-out.
With all those advantages, why did I even write about all the bevel-down smoothing planes. It seems a no-brainer.
Well, it’s not that simple. With the bevel-up tools you have to give up a few things. These are important to some woodworkers (myself included) and insignificant to others. You have to be the judge here.
First, there’s the position of the controls. Traditional bevel-down planes have the blade adjuster right where you want it: in front of your fingers. You don’t even have to remove your hand from the tote to adjust the depth. In fact, you can adjust the cutter while the plane is moving. I do this all the time.
With bevel-up planes, the controls are low on the tool – too low to reach without removing your hand from the tote.
Second trade-off: lateral-adjustment controls. With traditional bevel-down planes there are separate controls for depth adjustment and lateral adjustment (which centers the cutter in the mouth of the tool). With Veritas’s bevel-down planes, both controls are integrated into one adjuster, called a Norris-style adjuster. Some people love this arrangement. Some struggle with it and find that they cannot separately control the two functions (depth and lateral adjustment). The Lie-Nielsen bevel-up plane, the No. 164, is adjusted laterally with hammer taps, so it has a different feature set.
Third trade-off: comfort. If you like a traditional bevel-down plane, working with the bevel-up planes can be disconcerting. There’s no place to rest your index finger except on the tote itself. And if you were trained to extend your index finger, you feel naked, weird and alone (or maybe that’s just me).
All that said, the bevel-up planes are extraordinary tools for eliminating tear-out. Because the bevel faces up, you only have to hone the cutter to a higher angle to raise the cutting pitch of the plane. This is a tremendous game-changing advantage and is the reason that I really like the bevel-up tools and keep one handy that’s set with a high cutting angle (I like 62°).
If you work with exotics or curly woods, I wouldn’t even bother with the traditional bevel-down tools. Sorry, but that’s how I feel. I’d go straight to the bevel-up models. You’ll be happy.
But if you work with mild domestics, you should consider the trade-offs between the two forms before you make a purchase. In fact, the two formats are so different in the hand that I think it’s worthwhile to take a test drive of each form to see which you like better.
The Fore and Jack Planes
Welcome to the weird middle ground of plane sizes, where any tool can do any job and trade-offs abound. Historically, this size plane was used for roughing. You’d put a heavily cambered iron in the tool, open up the mouth all the way and take off huge ribbons of wood. In this day and age of inexpensive and accurate machinery, few people use this size tool in this historical manner. Let’s take a look.
A Stanley No. 5 jack plane
The No. 5 Bench Plane
Sole length: 14″
Cutter width: 2″
Commonly called a jack plane, the No. 5 is the most common plane out there. If a pre-war homeowner bought one plane, it was most likely a jack plane. Why? Well the jack plane can be set up to do almost any job.
Camber the iron and it can be a fore plane for removing stock. Set it up with a straight iron or a slightly cambered iron and it can be a shortish jointer plane. It won’t work as well as a jointer plane for this, but you can get away with a lot, actually. Set it up with a minutely cambered iron and take a light shaving and you can use the jack as a long-ish smoothing plane. Once again, it won’t be the end-all smoothing plane, but you’ll be surprised what you can do.
I know all this because this is how I worked when I had only one bench plane, a vintage No. 5. When people ask me what plane to buy if they only bought one, I usually recommend a No. 5 or its bevel-up equivalent.
Now that I own many more planes, I use the No. 5 as a fore plane. With a heavily cambered iron, I use it to dress stock that is too wide for my jointer or planer. With a sharp iron and mild material I can remove almost 1/16″ off at a time. It’s a powerful, effective and useful tool, even in a shop filled with machines.
The No. 5-1/4 Bench Plane
Sole length: 11-1/2″
Cutter width: 1-3/4″
Sometimes called the junior jack plane, tool collectors tell me that this plane shows up in a lot of inventories of manual training programs at public schools. It was a little lighter and shorter than the traditional jack, which made it easier for the shop-class misfits to wield.
I have only limited experience with this tool and have never owned one. My short stint with the tool was enough to convince me that there’s a reason that it’s an uncommon size. It was really too short to joint an edge accurately. The cutter width was the same as a No. 3, but the longer sole prevented it from getting into hollows like a smoothing plane.
If you’re a devotee of this tool, I want to hear from you.
A Stanley No. 6 fore plane with a scraping insert installed.
No. 6 Bench Plane
Sole length: 18″
Cutter width: 2-3/8″
The No. 6 bench plane, which Stanley actually called a fore plane, gets a bad rap. Patrick Leach, who administers the excellent Blood & Gore plane-reference site, runs down the No. 6 as a fairly useless chunk of iron. Here’s how he puts it: “You Satan worshipers out there might find them a useful prop during your goat slicing schtick by placing three of them alongside each other.”
I’ve owned a few No 6s and actually like them. I’ve set them up as fore planes, and they work quite well at that task. I’ve set them up as jointer planes, and they work surprisingly well at that task. In fact, I’ve found that it’s easier to teach someone to joint an edge with a No. 6 than one of the longer planes. There’s just less iron swinging around I guess.
I also have one set up with a scraping insert. Did I hear you say that’s nuts? Well, I thought so too, but it’s a great set-up for glued-up tabletops. Here’s why: When you glue up a tabletop from narrower boards, it’s tough to get the grain in all the individual boards going the same direction and looking good.
So when you go to plane down the tabletop, you run into lots of grain reversals. One way around this problem is to change planing directions several times while working the top. That can be tough sometimes. Or you can scrape the top – and that’s one of the best tasks for a scraper plane. And with a scraper plane that is long (like my No. 6) I can scrape the entire top without leaving any dished areas, which is more a problem with cabinet scrapers, card scrapers and short scraper planes.
The good news is that No. 6 planes are fairly plentiful on the secondary market and reasonably priced. Thanks Patrick!
A Veritas bevel-up jack plane on a shooting board.
Bevel-up Jack Planes
Sole length: 14″ to 15″
Cutter width: 2″ to 2-1/4″
One of the most common questions I get here at the magazine goes something like this: “I’m a beginner. I want to buy one premium handplane, and I want it to do the most tasks possible because I cannot afford a whole set of tools. Which tool should I buy?”
The answer is to buy one of the bevel-up jack planes. Yes, there are trade-offs (see the section above on the bevel-up smoothing planes), but these bevel-up tools are extraordinarily useful, versatile, adaptable and easy to use.
If you buy a couple extra irons, you can have a longish smoothing plane with a high cutting angle. You can have a shortish jointer plane that is good for jointing edges up to 36″ long. And you can put a straight iron in the tool and use it for shooting the ends of boards. No other plane that I own can do all three things like the bevel-up jack planes.
The one thing the tool doesn’t do very well is to work as a fore plane. I haven’t had much luck putting a heavily cambered iron in the tool and taking a super-thick shaving. Perhaps there’s some geometry at work there. Maybe I’m doing something wrong.
The longest tools in the bench plane family are designed to straighten and flatten the work. They are one of the most important tools in my kit, though many woodworkers go their entire careers without picking one up.
A Lie-Nielsen No. 7 jointer plane.
No. 7 Bench Plane
Sole length: 22″
Cutter width: 2-3/8″
Some woodworkers use a No. 7 plane for all their planing needs. Woodworking legend Alan Peters is said to use a No. 7 for jointing, smoothing and shooting. And if you set the tool up precisely and are a careful craftsman, you’ll find this is quite do-able. Like my experiments with a No. 5-1/2, I tried using a No. 7 for everything as well. I was surprised how easy it was, once I got used to the weight of the tool and balancing it on small pieces of work.
In a traditional shop, the No. 7 is the most common size of jointer plane. It is used for shooting the long edges of boards to form them into a wider panel. And it is used for dressing the faces of boards to make accurate surfaces for joinery.
Here’s how I use a jointer plane in my shop. I dress my stock using the machines, and then I further refine the faces and edges with a jointer plane. Sound fussy? Try it some time. Most machinery can get your boards only so flat. A jointer plane can take them one step further. And accurately prepped stock can help you when it’s time to cut your joints.
I also use it to joint the edges of boards for glue-ups. The jointer plane allows me to add a spring joint to a panel glue-up. A spring joint is where you plane the middle section of the edge a wee bit hollow. When you close up the joint with a clamp at the center, it closes the ends tightly. This allows you to use fewer clamps and keeps the ends of the joint in tension. This can be helpful with some stock because the ends of your panel will lose and gain moisture more rapidly than the center. So the extra pressure keeps everything together when the dry season hits.
There’s a lot of controversy about how the jointer plane’s iron should be sharpened. Some like it straight. Some like it curved. I use a slightly curved iron because it makes it child’s play to correct an out-of-square edge. And when I plane the faces of boards, the curved iron reduces the chance that the corners of the iron will dig into the work.
A No. 8 Lie-Nielsen jointer plane.
No. 8 Jointer Plane
Sole length: 24″
Cutter width: 2-5/8″
The No. 8 seems only a little bigger than the No. 7. But in reality, the No. 8 is a big beast of a tool compared to the No. 7. There seem to be some tipping points when it comes to the sizes of planes, and the No. 8 definitely tips the scales into a whole different class of tool.
Some people really dislike the extra weight and width of the tool. Other woodworkers love it. I fall into the “love it” category. Though I use a No. 7 at work, I keep a No. 8 in my shop at home (perhaps so I don’t have to share).
I’ve found that the No. 8 works like a freight train. Once you get it started, there’s little that will stop it. This is useful when dealing with patches of tough grain. The No. 8 just snowplows through.
The extra weight does come at a price: Surfacing boards can be more tiring. And you have to keep the iron sharper than you do on the No. 7. All the extra mass and width makes the No. 8 harder to push around when the iron gets a little dull. Oh, and you’ll want to keep some paraffin on hand to wax the sole. That’s a good idea for any plane, but it’s particularly true for the big boy of the planing world.
Bevel-up Jointer Planes
Sole length: 22″
Cutter width: 2-1/4″
Because of my affection for the bevel-up jack plane, you’d think I’d have the same enthusiasm for the bevel-up jointer. Not so much.
The bevel-up jointer plane is easier to use than its bevel-down cousin. And it is less expensive. But it also has a lower center of gravity, and I think that’s why I’m not as fond of it. The high center of gravity of the bevel-down jointer plane makes it easier for me to sense when the tool is tipping to the left or right. In other words, I can feel “plumb” better with a bevel-down jointer plane. The bevel-up jointer plane doesn’t give me that same feedback.
Other than that detail, the trade-offs are the same when you consider a bevel-up vs. a bevel-down tool.
Christopher Schwarz is editor of Lost Art Press and a contributing editor to Popular Woodworking Magazine. For more on all things handplanes from Chris, get his book “Handplane Essentials” – now in paperback.