SketchUp

I select the stile I want to copy and distribute.

Create a Linear Array in SketchUp

I’m currently working on a variation on L & J. G. Stickley’s No. 220 prairie settle. The settle’s three sides consist of frame and panels. Because I’m building a shorter version, I need to shorten the rails and resize the panels. Before SketchUp, I would have subtracted the combined width of the stiles from...

SKP_Dvtsls_2

Dovetails in SketchUp – Easier Than You Think

When I teach woodworkers about SketchUp we always reach a point where I say, “the level of detail to include in your model is up to you”. Then I explain the level that I usually work to and conclude with “but if you know what you’re doing it doesn’t take that long.” Dovetails are...

STKWDRB_#03

Use SketchUp to Preview Proportions

Of all the variables of design, context is the easiest to miss. That is one of the powerful things about using SketchUp, you can easily compare one piece to another, add a human figure to the model or place the piece in a room setting. Seeing is believing and knowing is better than guessing....

ellis cabinet

Proportion Problems Solved With SketchUp

I’m in the early planning stages for an upcoming project build for Popular Woodworking Magazine. The project will be a reproduction of a wardrobe cabinet from the early 1900s. I was trying to decide between three likely candidates. I thought that I had a decision made, but as I worked on the SketchUp model,...

Exploded Drawer

French Dovetails or Sliding Dovetails

Before I jump onto my soapbox to spout off, I’ll share a bit more about drawers for my upcoming workbench. I plan to have two stacks, each with five drawers. Sizes range from a small 2-3/16″-deep drawer to the deepest, bottom drawer at 3-3/8″ deep. My SketchUp drawing shows an exploded drawer, including how...