<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=376816859356052&amp;ev=PageView&amp;noscript=1">

Saddle-Style Push Stick

Any push stick adds a measure of safety, but I prefer using one that straddles the saw’s fence. It lifts right off when I’m done. A saddle-style push stick has two clear advantages. First, [...]

Grr-Ripper 2 Go Revew

Tool: Grr-Ripper 2 Go Shop Now   Manufacturer: MicroJig MSRP: $29 MicroJig, the company behind the much acclaimed, Grr-Ripper push block, recently released a new, trimmed-down version of the [...]

Never-Lost Push Stick

Editor’s note: Special thanks to reader Bob L, who pointed out that putting a rare earth magnet that close to a moving saw blade can have catastrophic consequences. If you choose to use [...]

Improved Push Pad

Ordinary push pads tend to slip, I’ve found, when face-jointing a board. I modified one of mine by cutting 1/2″ of the rubber padding off its back end and then screwing on a 1/2″ x [...]

Adjustable Push Shoe

A push stick is a familiar device to prevent kickback while ripping a board, but I prefer to use a “push shoe.” It’s shaped like a shoe with a handle, and has a heel, just like a boot. The [...]

Get a GRR-Rip!

Tool: GRR-Rip Block Manufacturer: MICROJIG Price: $83 (pack of 2) Push blocks are essential in every shop. I’ve used my fair share of them, and the new GRR-Rip Block from MicroJig just [...]

Start typing and press Enter to search