Precision Depth Gauge
My dovetail jig doesn’t have a depth gauge, and with my engineering background, I like things to be precise. This depth gauge allows me to set my router bits to within .001 of an inch! I also use [...]
Marking Gauge Refills
The blade of a marking gauge must be as sharp as a scalpel in order to cut a fine line across the grain. Sharpening it can be very difficult because it’s so small. I solved that problem by [...]
Precision Height Gauge
To set the height of a router bit—within .001″, if necessary—I made this simple stand for my caliper. It works on a router table or a hand-held router. Two screws with washers secure the [...]
Accurate and Easy Joint-depth Gauge
A straight mortise-and-tenon joint requires each tenon cheek to be flat, of consistent thickness and parallel to the body of the workpiece. If a cheek is twisted or angled relative to the faces [...]
Better Winding Sticks
Winding sticks are very useful for gauging twist in a board, but they’re difficult to read. My improved version of these time-tested helpers makes the twist stand out. I start with a pair of [...]
Precision Miter Saw Cuts
Cutting precisely to a line on a miter saw isn’t easy. Usually, you have to make multiple cuts and sneak up to it. My solution is to use this universal gauge block; one cut is all [...]
