Efficient Shop Wiring
A single cable provides 120-volt and 240V service. Every article I’ve seen describing the wiring of a shop for both 120 volts and 240V uses separate cables for each voltage, which is a [...]
Creating a Cord Channel for a Lamp Base
I recently ran into a turning dilemma when my wife asked me to make her a quick, inexpensive lamp base. I decided that a two-piece base would do the trick, attaching a long, narrow “neck” to a [...]
Workbench Lighting – Recessed Lights with High CRI
My wife makes fun of me because no matter what I go to Home Depot for, I end making a slow pass through the lighting section to take inventory of any new lighting products that have come out [...]
Q & A: Should I Run My Tablesaw on 120 or 240 Volts?
Should I Run My Tablesaw on 120 or 240 Volts? Q: My contractor’s saw pops a breaker every once in a while, and that’s driving me crazy. I noticed that its motor can be wired [...]
AW Extra 12/12/13 – Suspended Outlet
Suspended Outlet This is one of my favorite shop upgrades.By adding this suspended outlet over my work area I always have electricity close at hand. It sure beats running an extension cord across [...]
